Transfer Supports Location and Configuration M301.3 and M302.3 Location of the transfer supports shall be a minimum of 6 inches to a maximum of 19 inches from the top of the transfer surface...
Search Results "Fire-Building Surface"
-
Transfer Supports Location and Configuration M301.3 and M302.3
-
11B-705.2 Detectable directional texture
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars raised 0.2 inch (5.1 mm) from the surface...
-
Literature Cited
Standard test method for shock-absorbing properties of playing surface systems and materials. ASTM F355-95, Vol. 15.07....
-
AJW Architectural Products U592 1.6 Gallon Sanitary Napkin Disposal w/ Keyed Access Panel & Mounted Shelf - Surface Mounted
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Waste receptacle has a 1.5 gallon capacity Bottom panel is hinged for easy removal of...
-
Section 2. Common use areas
"Common use areas" means rooms, spaces or elements inside or outside of a building that are made available for the use of residents of a building or the guests thereof....
-
609 Grab Bars
Specifications address size, spacing, position, surfaces, fittings, and structural strength....
-
Floor Height [1013.4]
If the tent platform floor is raised above grade, the floor height must be no more than 19 inches when measured from the clear ground space to the tent platform surface....
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height....
-
Cal-Royal Products Grade 1 Cylindrical Lockset Calypso CAL Series
Specifications: APPLICATIONS - For offices, schools, hospitals, apartments, hotel/motel, residential, commercial and public buildings....
-
Federal Elevator 360 Passenger Elevator
The 360 elevator is the affordable answer to overcome architectural barriers in three or four level office buildings, clubs, and meeting halls, where permitted by local code....
-
3. Medical Diagnostic Equipment
rulemaking (NPRM) to remove the sunset provisions in the our existing accessibility standards for medical diagnostic equipment (MDE) related to the low-height specifications for transfer surfaces...
-
3. Medical Diagnostic Equipment
rulemaking (NPRM) to remove the sunset provisions in the our existing accessibility standards for medical diagnostic equipment (MDE) related to the low-height specifications for transfer surfaces...
-
1.1.7.1 Differences
In the event of any differences between these building standards and the standard reference documents, the text of these building standards shall govern....
-
1.1.7.1 Differences
In the event of any differences between these building standards and the standard reference documents, the text of these building standards shall govern....
-
Subject testing
A study was designed to investigate a correlation between surface roughness and WBV exposure to WC users in an attempt to determine which surfaces should be considered acceptable....
-
Rebuilding Together Alexandria - Alexandria, VA
items that the National Center for Healthy Housing found to drastically improve living conditions for residents, such as operable smoke/CO2 detectors, proper ventilation, and a working fire...
-
5. Significance and Use
5.1 This practice provides a means for obtaining a quantitative estimate of a surface property defined as roughness using longitudinal profile measuring equipment. 5.1.1 The PRI is portable...
-
1132A.4 Level floor or landing
Primary entry doors, required exit doors or secondary exterior doors with changes in height between the interior surface or floor level and the exterior surface or floor level shall comply...
-
Safety
Safety The Segway must be operated in a manner that does not compromise the safety of the user, the building occupants or the building infrastructure. ...
-
VII. New Construction and Alterations
When a public entity undertakes alterations to an existing building, it must also ensure that the altered portions are accessible....
-
State and Local Access Codes
Building design and construction, including safety and accessibility, is largely regulated and enforced by states and local jurisdictions....
-
Additions: ADA Standard Section 233.3.3
Section 233.3.3: covers scoping requirements in the current ADA Standards for additions to residential facilities.
-
1.9.1.2 Application
accommodations, as defined, and commercial facilities, as defined, shall be accessible to persons with disabilities as follows: Exception: Certain types of privately funded multistory buildings...
-
SECTION 1011 STAIRWAYS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for applications...
