When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor. [S.H. ...
Search Results "Ground Floor"
Commonly Searched Documents
-
11B-704.4.1 Height
-
F214 Washing Machines and Clothes Dryers
an exception from the requirement for an accessible route in private multi-level buildings and facilities that are less than three stories or that have less than 3,000 square feet per floor...
-
IX. New Construction
Elevators are not required in facilities under three stories or with fewer than 3,000 square feet per floor, unless the building is a shopping center, shopping mall, professional office...
-
Using Patient Lifts
Patient lifts may move along the floor or be mounted on an overhead track attached to the ceiling or to a free-standing frame. A staff person operates the lift....
-
211 Drinking Fountains
Scoping requirements apply where drinking fountains are provided on exterior sites, on floors, and within secured areas....
-
1003.2.13.2 Enclosed exit stairways
considered part of an accessible means of egress, shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate an area of refuge within an enlarged floor-level...
-
Notes:
Measured from the point on the floor where a perpendicular line intersects the front edge of breast platform shown in Figure 10....
-
3(2)
Pocket or sliding doors are acceptable doors in covered dwelling units and have the added advantage of not impinging on clear floor space in small rooms....
-
608.6 Shower Spray Unit and Water
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical...
-
2.1.2.1 Summary of IEC 118‒4 (1981) Standards
These values apply to the vertical component of the field strength inside the area enclosed by the loop, measured 1.2 meters above the floor....
-
608.6 Shower Spray Unit and Water
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical...
-
1.1.1
Although ramps with a slope slightly less than 1:12 take up more floor space, the negligible loss in usable space will more than compensate for potential problems caused by rebuilding or...
-
1133A.4.1 Repositionable countertops
Finished flooring shall be extended to the wall beneath the sink and work surface....
- Acoustiguide Custom Multimedia Content Application
-
ASTM: ADA Standard Section 105.2.3
Section 105.2.3 of the ADA Standards cover references to the American Society for Testing and Materials (ASTM) standards.
- Panda S.15 All Wood with Aluminum Core Lift & Slide System
- Panda S.12 Solid Wood Lift & Slide System
-
Re: Section 307 Protruding Objects
The more blatant inconsistency is the lavatory, which is required to be 17" deep minimum due to the required forward approach clear floor/knee and toe space, and must provide knee clearance...
- Panda S.65 All Aluminum with Aluminum/Wood Clad Multi-Slide Door System
- Panda IS.14 All Aluminum IMPACT Lift & Slide System
- AccessRec De-Bug All Terrain Wheelchair
- Pilot Rock UT Series Side Accessible Picnic Table Using Recycled Plastic
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2
Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.