Stainless steel frame holds up to 500 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.)....
Search Results "Ground Floor"
-
Access-Able Designs Stationary Dressing Bench DST-101
-
BS8300:2001 Research
They include information on space required for “kneeholes,” reaching abilities of wheeled mobility users, clear floor area space requirements and maneuvering clearances....
-
A. Arena Assembly Seating:
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
11B-604.5.1 Side wall
A bath station that can be activated by a patient lying on the floor shall be provided at each room containing a patient water closet, bathtub, sitz bath, or shower stall....
-
AD Systems’ Exam Room Doors
Compared to swing-design doors, our exam room doors can save up to 25-30 square feet of usable floor space for each application....
-
DORMA BTS80 EMB Series Door Closer
Floor-Concealed Door Closer with Electromagnetic Hydraulic Hold Open The BTS80 EMB Series is an aesthetically pleasing floor closer for fire and life safety, remote release and control...
-
405.2 Slope (Exception 2), 405.6 Rise (Exception)
The floor level of emergency transportable housing units is typically elevated 36 inches above the ground....
-
Site Selection
Facilities that have ground floor meeting rooms with accessible paths directly to the outside are also preferable, as this may allow greater numbers of individuals to evacuate independently...
-
Murdock Manufacturing Grab Bars
Grab bars are designed to support a load of at least 250 pounds (113.4 kilogram) grab bars at 33 inch (83.82 cm) above floor or in accordance with local accessibilty regulations....
-
Wikk Industries Inc. Bollard With Push Plate PART# BPS SM PRP36 CL (628)
Features: 6” square with 1/8” wall Black HDPE mortised removable cap with a transmitter mounting strap Standard single gang prep located at 36” From Finished Floor (FFF) Complete...
-
Wikk Industries Inc. Bollard With Push Plate PART# BPS SM TUBE 32D (630)
Features: 6” square with 1/8” wall Black HDPE mortised removable cap with a transmitter mounting strap Standard single gang prep located at 36” From Finished Floor (FFF) Complete...
-
Bradley Security Grab Bars SA70 Series
All welds ground and polished to blend. Mandrel bending process maintains uniform bar diameter. Return provides 1½" standard safety clearance between wall and bar....
-
Aquatic Access Pool Lift IGAT-180-AD
Model IGAT-180 AD IN-GROUND AUTOMATIC TURN OF 180 DEGREES FOR POOLS AND SPAS WITH AUTOMATIC POOL COVERS OR UNUSUAL DESIGN Meets 2010 Standards for Accessible Design (ADA)....
-
Simple Pump Company ADA 100 Simple Water Pump
In addition to Simple Pump's hand pump design advantages, the ADA100 includes these advantages: Convenient wheelchair access Drive shaft target installation elevation is 34" above ground...
-
American Dryer, Inc Wall Guard Accessory
Dramatically reducing moisture on walls and floors, new patent-pending Wall Guard is ADA compliant, achieving the four-inch-or-less unit protrusion guidelines without the need to recess...
-
Cybex Total Access Recumbent Bike
This allows fitness enthusiasts who have physical or sensory limitations to take advantage of fitness training on the same gym floor and using the same equipment as those who do not....
-
407.2.2.1 Visible and Audible Signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. EXCEPTIONS: 1....
-
11B-217.4.1 Bank requirement
[2010 ADAS] EXCEPTION: TTYs shall not be required at banks of telephones located within 200 feet (61 m) of, and on the same floor as, a bank containing a public TTY. ...
-
M302.4.1 Clearance in Base
The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
M301.4.1 Clearance in Base
The base of diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured...
-
3. Lavatory knee clearance
faucet hardware, the following features need to be provided -- a 29-inch-high clearance under the front edge of the lavatory, the top of the bowl mounted no higher than 34 inches above the floor...
-
11B-411.2.1.7.3 Assignment by security credential
Upon presentation of security credential, the destination floor shall be confirmed by verbal announcement and on the display screen....
-
11B-604.9.6 Dispensers
The outlet of the dispenser shall be 14 inches (356 mm) minimum and 19 inches (483 mm) maximum above the finish floor....
-
1133A.3 Removable base cabinets
The finish floor beneath kitchen sinks and work surfaces shall be extended to the wall....
