requires entities to design and construct at least 10 percent of the unit pads to accept the installation of units with mobility features and to be on an accessible route.31 We required a minimum...
Search Results "Minimum Dimension"
Commonly Searched Documents
-
A. Scoping Requirements for Units with Mobility Features
-
5.1 Architectural Barriers Act (ABA).
The following ABA requirements apply to recipients of federal financial assistance from DOT: 5.1.1 ATBCB Final Rule, 36 CFR part 1190, Minimum Guidelines and Requirements for Accessible...
-
3.2 MDE Advisory Committee Process
In all cases except one – the minimum height of transfer surfaces – the Committee reached consensus on the recommended accessibility standards (see Section 5)....
-
1.4 Overview of Report
Section 6 briefly introduces the standard about which Committee members did not reach consensus: the minimum transfer surface height....
-
1134A.2 Number of complying bathrooms
A minimum 18-inch (457 mm) clear maneuvering space shall be provided on the swing side of the door at the strike edge of the door. 9. ...
-
Camping Units
The minimum size of a camp living area is determined by the type and number of constructed features provided and the required clear space around each feature....
-
1134A.2 Number of complying bathrooms
A minimum 18-inch (457 mm) clear maneuvering space shall be provided on the swing side of the door at the strike edge of the door. 9....
-
Parking
cones to create the access aisle and accessible route and a temporary ramp provides access to the sidewalk ADA Requirements Parking provided at the polling place must meet specific minimum...
-
11B-213.3.1 Toilet compartments
Full-height partitions and door assemblies can comprise toilet compartments where the minimum required spaces are provided within the compartment....
-
11B-608.6 Shower spray unit and water
A shower spray unit with a hose 59 inches (1499 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided....
-
Turnstiles and Security Gates at Entrances
If it is not readily achievable to provide a minimum 32 inch wide opening, then the opening should be as wide as possible....
-
11B-706.1 General
The technical standards for assistive listening systems describe minimum performance levels for volume, interference, and distortion....
-
11B-805.7 Built-in cabinets and work surfaces
Clinical laboratory work stations provided in a laboratory area that are in addition to the minimum number required to be accessible (5 percent of the work stations provided, but no fewer...
-
Plan 4A: 13-Foot Wide Accessible Guest Room
• 30-inch wide by 48-inch long minimum clear floor space provided beyond the arc of the swing of the entry door (section 603.2.3 exception 2). ...
-
Smooth Surface
Exception 2 exempts tempered glass doors without stiles that have a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal....
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
-
221 Assembly Areas
The minimum number of wheelchair spaces is specified according to the total number of seats provided in an assembly area (Table 221.2.1.1)....
-
Number of Accessible Entrances
The minimum number of entrances required to be accessible has been increased from 50% to 60% in the final rule....
-
36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
The standards for medical diagnostic equipment (MDE Standards) contain minimum technical criteria to ensure that medical diagnostic equipment, including but not limited to, examination tables...
-
ADOPTION OF A 19 INCH HEIGHT MINIMIZES COSTS TO HEALTH CARE PROVIDERS
a departure from the existing broadly accepted transfer surface height maximum of 19 inches, information related to costs is especially critical to take into account in determining the minimum...
-
18 Inch Low Height
Finally, a majority of committee members proposed a range for the low height of 17 to 19 inches rather than establishing an absolute minimum....
-
28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities (2010 ADA Title III Regulations with amendments issued through Dec. 2016)
The Department is issuing this final rule in order to adopt enforceable accessibility standards under the Americans with Disabilities Act of 1990 (ADA) that are consistent with the minimum...
-
1.1.2 Purpose
The purpose of this code is to establish the minimum requirements to safeguard the public health, safety and general welfare through structural strength, means of egress facilities, stability...
-
Foot Travel on Trails and Roads With Restrictions
Department of Agriculture has determined that a minimum of 36 inches (915 millimeters) of clear passage must normally be provided around or through the gate, berm, or other restrictive device...