Specifications: Application For hospitals, clinic offices and other institutions Door Type Solid core wood or hollow metal Stile Width 4-1/2" minimum Door Thickness 1-3/4" standard...
Search Results "Minimum Dimension"
-
TownSteel MS Series, Grade 1 with Push Pull Mortise Locks
-
Guardian Barrier-Free Safety Station with WideArea™ Eye/Face Wash GBF1909PCC
ADA compliance: Unit complies with ADA requirements for accessibility by disabled persons (maximum height and reach, minimum knee clearance and distance from obstructions)....
-
Wheelchairs and Other Power-Driven Mobility Devices
Businesses must consider these factors in determining whether reasonable modifications can be made to admit other power-driven mobility devices to their premises: The type, size, weight, dimensions...
-
QUESTION: WHAT INFORMATION ARE PVOs RESPONSIBLE FOR PROVIDING TO PASSENGERS WITH DISABILITIES CONCERNING ACCESSIBILITY MATTERS?
For example, if a person with a disability asks about the dimensions or features of a cabin, whether there is accessible vertical access between the deck where his or her cabin would be...
-
A4.6.3 Parking Spaces
Also, the required dimensions of the access aisle cannot be restricted by planters, curbs or wheel stops....
-
Bonded Impact/cushioning Surfaces
Bonded Impact/cushioning Surfaces Eight different surface test specimens were formed with surface dimensions of 1.2m x 1.2m with a depth of 0.3m (48”x48”x 12”) in Madison WI (Figure 1...
-
11B-606.2 Clear floor space
A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or...
-
11B-706.1 General
The technical standards for assistive listening systems describe minimum performance levels for volume, interference, and distortion....
-
11B-233.3.1.2.6.3 Test number two, site analysis test
The minimum percentage of ground floor units required on an accessible route shall equal the percentage of the total buildable area (not restricted-use areas, flood plains or wetlands) of...
-
11B-706.1 General
The technical standards for assistive listening systems describe minimum performance levels for volume, interference, and distortion....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
Sites where either Test No. 1 or Test No. 3 is used and it is determined that an accessible route to the common (lobby) entrance is not required, a minimum of 20 percent of the ground floor...
-
11B-606.2 Clear floor space
A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or...
-
11B-233.3.1.2.6.3 Test number two, site analysis test
The minimum percentage of ground floor units required on an accessible route shall equal the percentage of the total buildable area (not restricted-use areas, flood plains or wetlands) of...
-
Providing Comforts and Conveniences—Constructed Features
Compare the dimensions of the product to the applicable Architectural Barriers Act Accessibility Standards or Forest Service Outdoor Recreation Accessibility Guidelines requirements to make...
-
11B-703.7.2.5 Cleaner Air Symbol
The symbol, which shall include the text “Cleaner Air” as shown, shall be displayed either as a negative or positive image within a square that is a minimum of 6 inches (152 mm) on each...
-
1016.5 Obstacles
Where possible, obstacles that cross the full width of outdoor recreation access routes should be separated by a distance of 48 inches (1220 mm) minimum....
-
Building Entrance
At least one door at the accessible entrance must have a minimum clear width of 32 inches for a voter who uses a wheelchair or other mobility device to pass through the doorway....
-
11B-705.1.2.2 Curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the line at the face of the curb marking the transition...
-
Revolving Doors or Turnstiles
While automated revolving doors, if large enough, may be usable by people with disabilities, certain questions remain about the appropriate maximum speed, minimum diameter, compartment size...
-
Team Player Seating Areas
If designers and operators are designing a field or court that will serve a variety of wheelchair sports, exceeding the minimum requirements will better accommodate participants....
-
Sloped Entries
Sloped Entries Sloped entries must comply with ADAAG accessible route provisions (36 inch minimum width, maximum 1:12 or 8.33% slope), except that the surface does not need to be slip...
-
F235.2.1 Dispersion
Where the minimum number of boat slips required to comply with 1003.3.1 has been met, no further dispersion shall be required. Advisory F235.2.1 Dispersion....
-
F221.4 Designated Aisle Seats
Only when all seats on Aisle A would not meet the five percent minimum would seats on Aisle B be designated....
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2....
