Tactile characters shall be 2 inches (51 mm) high minimum. A tactile star shall be provided on both jambs at the main entry level....
Search Results "Minimum Dimension"
Filters
Commonly Searched Documents
-
11B-407.2.3.1 Floor designation
-
3. Buttock-Popliteal Length
The horizontal line splitting the box depicts the median, the box length represents the inter-quartile (25th – 75th percentile) range, and the whiskers represent the minimum and maximum...
-
What other voting rights laws does the Justice Department enforce?
The Help America Vote Act of 2002 (42 U.S.C. 15301 to 15545) is designed to improve the administration of elections in the United States by establishing minimum standards for states to follow...
-
404.2.10 Door and Gate Surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...
-
5.1.2 Transfer Surface High Height Recommendations for M301 and M302
Since one key factor in ease of transfer is locating the transfer surface near or at the same height as the seat of the wheeled mobility device, moving the minimum high point for adjustability...
-
6. Transfer Surface Height
For many types of imaging equipment it will not be feasible to provide a transfer surface meeting the considered minimum height whether it is17, 18, or 19 inches....
-
Front grab bar protocol
Maximum and minimum heights attainable, front grab use, and grab bar heights for each the lower-height and higher-height transfers were recorded....
-
711.3.2 Membrane penetrations
Where walls and partitions are required to have a minimum 1-hour fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced....
-
404.2.10 Door and Gate Surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...
-
233.3.4.2 Alterations to Individual Residential Dwelling Units
least one other room is altered, the requirements of 233.3.1 shall apply to the altered residential dwelling units until the total number of residential dwelling units complies with the minimum...
-
Public Education
The Supervisor shall ensure that the information on the accessible voting system on its website conforms to, at a minimum, the Web Content Accessibility Guidelines 2.0 Level AA Success Criteria...
-
7.3(1)
(1) In new construction, accessible check-out aisles shall be provided in conformance with the table below: Total Check-out Aisles of Each Design Minimum Number...
-
Carpet [4.5.3]
There should be minimum movement, none if possible, between the cushion or pad and the carpet....
-
§1630.2(j)(3)(iii)
iii) For example, applying the principles set forth in paragraphs (j)(1)(i) through (ix) of this section, it should easily be concluded that the following types of impairments will, at a minimum...
-
11B-233.3.4.2 Alterations to individual residential dwelling units
other room is altered, the requirements of Section 11B-233.3.1 shall apply to the altered residential dwelling units until the total number of residential dwelling units complies with the minimum...
-
APPENDIX A. GUIDELINES FOR SERVICE ANIMAL RELIEF AREAS (SARA)
In addition to the guidance below, airports must consult with one or more service animal training organizations regarding the design, dimensions, materials and maintenance of service animal...
-
Service Counters
If we look at 11B-904.4.1, we see that a 36” minimum long section of the counter needs to be installed at 34” maximum height. ...
-
Section 35.151(c) Accessibility standards for new construction and alterations
Section 204 of the ADA, 42 U.S.C. 12134, directs the Attorney General to issue regulations to implement title II that are consistent with the minimum guidelines published by the Access Board...
-
Section 35.151(c) Accessibility standards for new construction and alterations (Section-by-Section Analysis)
Section 204 of the ADA, 42 U.S.C. 12134, directs the Attorney General to issue regulations to implement title II that are consistent with the minimum guidelines published by the Access Board...
-
Dispersion: ADA Standard Section 224.5
Section 224.5 covers scoping requirements in the current ADA Standards for dispersion of transient lodging guest rooms.
-
11B-224.5 Dispersion
Where the minimum number of guest rooms required to comply with Section 11B-806 is not sufficient to allow for complete dispersion, guest rooms shall be dispersed in the following priority...
-
American Standard Yorkville 1.6 gpf Right Height Elongated Pressure Assisted Toilet
trip lever Speed Connect® tank/bowl coupling system 4 bolt caps Sanitary bar on bowl Recommended working pressure range 25 psi - 80 psi Specs Dimensions...
-
AJW Architectural Products UG2-Railing UG2X-Y108 108" Concealed Snap Flange, 1.25" Diameter, Peened Grip - Configuration Y
Secure mounting plate to wall surface at specified location with proper anchors (snugly) until proper centerline dimension is achieved....
-
American Standard Cadet 1.6 gpf Right Height Elongated Pressure Assisted Toilet
trip lever Speed Connect® tank/bowl coupling system 2 bolt caps Sanitary bar on bowl Recommended working pressure range 25 psi - 80 psi Specs Dimensions...
