The Board sponsors and coordinates research for use in developing accessibility guidelines and providing technical assistance to the public....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
Research Projects
-
R101.1 General
This document contains scoping and technical requirements to ensure that facilities for pedestrian circulation and use located in the public right-of-way are readily accessible to and usable...
-
R307 Accessible Pedestrian Signals and Pedestrian Pushbuttons (See R209) (Section-by-Section Analysis)
R307 Accessible Pedestrian Signals and Pedestrian Pushbuttons (See R209) (Section-by-Section Analysis) In the 2005 draft of the proposed guidelines, the technical requirements for accessible...
-
ADA National Network
To find your regional Center – www.adata.org For technical assistance – 800-949-4232 voice/tty Fact sheets, handbooks and guides...
-
Research Projects
Research Projects The Board sponsors and coordinates research for use in developing accessibility guidelines and providing technical assistance to the public....
-
Shared Use Paths
The preamble to the proposed rule indicated that the proposed scoping and technical requirements for trails would apply to shared use paths....
-
R213 Transit Stops and Transit Shelters (Section-by-Section Analysis)
R213 Transit Stops and Transit Shelters (Section-by-Section Analysis) Transit stops and transit shelters must comply with the technical requirements for transit stops and transit shelters...
-
Required Compliance with the IBC [§207]
Issued by the International Code Council (ICC), the IBC addresses the number of means of egress required and technical criteria for them, including fire–resistance rating, smoke protection...
-
DEFINITIONS
high-priority barriers) Executive Sponsor Oversight Team Barrier Removal Facilities Members Plaintiffs Plaintiffs’ Counsel Program Manager Providers Service Area Technical...
-
Research Projects
The Board sponsors and coordinates research for use in developing accessibility guidelines and providing technical assistance to the public....
-
Section 36.103 Relationship to Other Laws (Preamble, Section-by-Section Analysis)
The standards of title V of the Rehabilitation Act apply for purposes of the ADA to the extent that the ADA has not explicitly adopted a different standard from title V....
-
11B-1003.2.1 Boat slips
increase in the length of the gangway shall not be required to comply with Section 11B-1003.2 unless required by Section 11B-202.4 _|Path of Travel Requirements in Alterations, Additions and Structural...
-
11B-1003.2.1 Boat slips
increase in the length of the gangway shall not be required to comply with Section 11B-1003.2 unless required by Section 11B-202.4 _|Path of Travel Requirements in Alterations, Additions and Structural...
-
602.7 Drinking Fountains for Standing Persons
Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1090 mm) maximum above the finish floor or ground....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
704.2.1.2 Forward Approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
603.4 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor....
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
604.8.3 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor....
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
The transfer support should be located a maximum distance of 1½ inches from the transfer surface....