Handrail gripping surfaces with a circular cross section shall have an outside diameter of 32 mm (1.25 in) minimum and 51 mm (2 in) maximum....
Search Results "Grade 2 Braille"
-
R409.7.1 Circular Cross Section
-
T503.3 Steps at Front Doorways
The walking surface on steps serving the front doorway of non-rail vehicles shall be lighted with 2 foot-candles (22 lux) minimum of illumination when the vehicle doors are open....
-
§8.51 Self-evaluation.
(Approved by the Office of Management and Budget under control number 2529-0034) [53 FR 20233, June 2, 1988, as amended at 54 FR 37645, Sept. 12, 1989]...
-
§8.55 Compliance information.
(Approved by the Office of Management and Budget under control number 2529-0034) [53 FR 20233, June 2, 1988, as amended at 54 FR 37645, Sept. 12, 1989]...
-
19.1 Q. If a sliding door track has a threshold of 3/4, does this trigger requirements for ramps?
The Guidelines at Requirement 4 provide that thresholds at doors, including sliding door tracks, may be no higher than 3/4 and must be beveled with a slope no greater than 1:2....
-
12209(3) Report to Congress
(3) Report to Congress The chief official of each instrumentality of the Congress shall, after establishing remedies and procedures for purposes of paragraph (2), submit to the Congress...
-
C1-c
[ADA Standards § 4.3.3] Yes No If No, does the accessible route narrow to 32 inches for no more than 2 feet?...
-
12143(c)(3) Service criteria
(3) Service criteria Subject to paragraphs (1) and (2), the regulations issued under this section shall establish minimum service criteria for determining the level of services to be...
-
Appendix: FSTAG Implementation Process Flowchart
Step 1: Determine Applicability of FSTAG Step 2: Identifiy Presence of Limiting Factors Step 3: Apply Technical Provisions Step 4: Calculate Cumulative Percentage...
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
4.34.6.5(3)
(3) The depth of a sink bowl shall be no greater than 6-1/2 in (165 mm). Only one bowl of double- or triple-bowl sinks needs to meet this requirement....
-
§ 38.159(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches (50 mm) high to prevent mobility aid wheels from slipping off....
-
§ 38.95(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.125(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.83(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
DISABILITY
(2) Rules of construction. i....
-
DISABILITY
(2) Rules of construction. i....
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Accessible routes serving floating boarding piers shall be permitted to use Exceptions 1, 2, 5, 6, 7 and 8 in 1003.2.1. 2....
-
Height Requirements
besides the height specifications, this exception has been recast as a general exception from section 309 and has been relocated to the scoping requirement for operable parts in Chapter 2...
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
610.3.2 L-Shaped Seats
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
B. Communication Rooms
9.1.3] (Table 9.1.3) Number of Rooms In the Hotel Rooms for Hearing Impaired Guests 1 - 25 1 26 - 50 2...
-
502.4 Platform Accessibility Features
Platforms and platform software shall conform to the requirements in ANSI/HFES 200.2, Human Factors Engineering of Software User Interfaces — Part 2: Accessibility (incorporated by reference...