unit with adaptable features where sanitary facilities are located within the unit or suite must provide at least one bathroom complying with the definition of “bathroom” found in Chapter 2...
Search Results "Grade 2 Braille"
-
11B-809.10.2 Number of complying bathrooms and fixtures
-
COMMERCIAL FACILITIES
Commercial facilities shall not include (1) facilities that are covered or expressly exempted from coverage under the Fair Housing Act of 1968, as amended (42 U.S.C. 3601 - 3631); (2) aircraft...
-
11B-703.5.5 Character height
(305 mm) of viewing distance above 72 inches (1829 mm) Greater than 70 inches (1778 mm) to less than or equal to 120 inches (3048 mm) less than 180 inches (4572 mm) 2...
-
11B-703.5.5 Character height
(305 mm) of viewing distance above 72 inches (1829 mm) Greater than 70 inches (1778 mm) to less than or equal to 120 inches (3048 mm) less than 180 inches (4572 mm) 2...
-
11B-809.10.2 Number of complying bathing rooms and fixtures
unit with adaptable features where sanitary facilities are located within the unit or suite must provide at least one bathroom complying with the definition of “bathroom” found in Chapter 2...
-
Sargent 8800 Rim Exit Device
Single point rim latching device Single door & double door applications with mullions Quiet operation and solid security Devices are ANSI A156.3 - 2001 Grade...
-
ADA-100® Area of Refuge Communication System
Recorded voice dialer or pager option (ADA-2100) UL listed battery backup system (ADA-BBU-UL) Master Station desktop base (ADA-DTB) Blue (24 VDC) area station flashing strobe light Braille...
-
501.1 Scope
The requirements of Chapter 5 shall apply to ICT software and applications where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise...
-
Yale nexTouch™ Keypad Lock
With a heavy-duty design and ANSI/BHMA Grade 1 certification, nexTouch provides durable and reliable security from a brand trusted for over 170 years....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
STANDARD BUILDING EVACUATION SYSTEMS
The circulation path 2. The occupant notification system(s) 3. Directions to and through the circulation paths...
-
References
References IEC 60601-2-52 "Particular requirements for the basic safety and essential performance of medical beds" ANSI/AAMI HE 75, section 16.4.7 (h....
-
T303.3.1 Seat-Back Handhold Cross Section
The cross section of seat-back handholds shall have an outside diameter of 7/8 inches (22 mm) minimum and 2 inches (50 mm) maximum....
-
27.1 Q. Do the Guidelines set any requirements for the type or location of bathtub controls?
No, except where the specifications in Requirement 7(2)(b) are used....
-
5. Curb Ramp Running Slope
5. ...do the curb ramps have running slopes of 1:12 or less (critical dimension of 2" or less)?...
-
7. Exterior Ramp Running Slope
7. ...do the exterior ramps have running slopes of 1:12 or less (critical dimension of 2" or less)?...
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
C1-3. Accessible Route Width
If No, the accessible route may narrow to 32 inches wide for up to 2 feet in length. Yes _____ No _____...
-
1. Is this trail designed and managed predominantly as a pedestrian/hiker trail?
If “Yes is selected, then skip to Question #2....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
§ 38.23(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
ACCESSIBLE DWELLING UNITS
Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
