Monetary Relief UPDC agrees to pay $27,500 to compensate the aggrieved person described in Paragraph 2 of this Agreement. ...
Search Results "Grade 2 Braille"
-
Monetary Relief
-
III-7.3130 General exceptions
Accessibility is not required to -- 1) Observation galleries used primarily for security purposes; or 2) Nonoccupiable spaces accessed only by ladders, crawl spaces, very narrow passageways...
-
11B-224.4 Guest rooms with communication features
COMMUNICATION FEATURES Total Number Of Guest Rooms Provided Minimum Number Of Required Guest Rooms With Communication Features 1 1 2...
-
11B-224.4 Guest rooms with communication features
TOTAL NUMBER OF GUEST ROOMS PROVIDED MINIMUM NUMBER OF REQUIRED GUEST ROOMS WITH COMMUNICATION FEATURES 1 1 2...
-
ASTM
per foot value for straight propulsion and for turning less than the average work per foot values for straight propulsion and for turning, respectively, on a hard, smooth surface with a grade...
-
ASTM
per foot value for straight propulsion and for turning less than the average work per foot values for straight propulsion and for turning, respectively, on a hard, smooth surface with a grade...
-
Global Access Association
These are built upon the enduring Truth of Scripture, with the foundation and cornerstone of Jesus Christ (Ephesians 2:19-22)....
-
11B-101.2 Reserved
(2)(i) Safe harbor....
-
11B-101.2 Reserved.
Chapter 11B of CBC does not use the term "Safe Harbor," but contains a limited version of the same principle at Section 11B-202.4, Exception 2....
-
12209(b)(1) In general
.-- Notwithstanding any other provision of this Act or of law, the purposes of this Act shall, subject to paragraphs (2) and (3), apply in their entirety to the House of Representatives....
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
M303.3.2 Beveled
Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a of 1/2 inch (13 mm) under rated loading to zero loading conditions....
-
T301.1 Scope
The requirements in Chapter 3 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T701.1 Scope
The requirements in Chapter 7 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T401.1 Scope
The requirements in Chapter 4 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T501.1 Scope
The requirements in Chapter 5 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T601.1 Scope
The requirements in Chapter 6 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T303.3.2 Handrail and Stanchion Circular Cross Section
Handrails and stanchions with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (50 mm) maximum....
-
§8.57 Procedure for effecting compliance.
[53 FR 20233, June 2, 1988; 53 FR 28115, July 26, 1988, as amended at 72 FR 73491, Dec. 27, 2007]...
-
12186(a)(3) Standards
(3) Standards The regulations issued pursuant to this subsection shall include standards applicable to facilities and vehicles covered by sections 12182(b)(2) and 12184 of this title....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
10.2.2(1)
(1) Bus stop sites shall be chosen such that, to the maximum extent practicable, the areas where lifts or ramps are to be deployed comply with section 10.2.1(1) and (2)....
