Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
Search Results "Grade 2 Braille"
-
1017.5 Tread Obstacles
-
610.3.2 L-Shaped Seats
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
B. Communication Rooms
9.1.3] (Table 9.1.3) Number of Rooms In the Hotel Rooms for Hearing Impaired Guests 1 - 25 1 26 - 50 2...
-
502.4 Platform Accessibility Features
Platforms and platform software shall conform to the requirements in ANSI/HFES 200.2, Human Factors Engineering of Software User Interfaces — Part 2: Accessibility (incorporated by reference...
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
A4.3.1(1) Travel Distances
Many disabled person can move at only very slow speeds; for many, traveling 200 ft (61 m) could take about 2 minutes. This assumes a rate of about 1.5 ft/s (455 mm/s) on level ground....
-
1.2.5 Ramps
Many accessibility experts consider a 2% cross slope to be the maximum....
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Accessible routes serving floating boarding piers shall be permitted to use Exceptions 1, 2, 5, 6, 7 and 8 in 1003.2.1. 2....
-
F233.3.1.2 Residential Dwelling Units with Communication Features
On military installations with residential dwelling units, at least 2 percent, but no fewer than one unit, of the total number of residential dwelling units shall provide communication features...
-
5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides
A minimum 2 inch high edge protection must be provided on both sides of the platform for double ramped entry platforms....
-
I3
[ADA Standards § 4.31.9 (2)] Yes No...
-
A4.26.2 Size and Spacing of Grab Bars and Handrails
This specification allows for alternate shapes of handrails as long as they allow an opposing grip similar to that provided by a circular section of 1‒1/4 in to 1‒1/2 in (32 mm to 38 mm)...
-
4.34.3(3) Forward and Parallel Approach
If both a forward and parallel approach are possible, operable parts of controls shall be placed within at least one of the reach ranges in paragraphs (1) or (2) of this section....
-
A4.26.2 SIZE AND SPACING OF GRAB BARS AND HANDRAILS
This specification allows for alternate shapes of handrails as long as they allow an opposing grips similar to that provided by a circular section of 1-1/4 in to 1-1/2 in (32 mm to 38 mm...
-
FAQ: How do I submit an upcoming event for the Calendar?
Click on the "FEEDBACK OR HELP" button that appears on every page of Corada. 2. Contact us via email....
-
FAQ: How do I submit a website for the Links page?
Click on the "FEEDBACK OR HELP" button that appears on every page of Corada. 2. Contact us via email....
-
RECOMMEND
[DSA-AC, HCD 1 & HCD 2] Does not require mandatory acceptance, but identifies a suggested action that shall be considered for the purpose of providing a greater degree of accessibility...
-
RECOMMEND
[DSA-AC, HCD 1 & HCD 2] Does not require mandatory acceptance, but identifies a suggested action that shall be considered for the purpose of providing a greater degree of accessibility...
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
DISABILITY
(2) Rules of construction. i....
-
DISABILITY
(2) Rules of construction. i....
-
1630.2(p)(1)
means, with respect to the provision of an accommodation, significant difficulty or expense incurred by a covered entity, when considered in light of the factors set forth in paragraph (p)(2)...
-
RECOMMEND
[DSA-AC, HCD 1 & HCD 2] Does not require mandatory acceptance, but identifies a suggested action that shall be considered for the purpose of providing a greater degree of accessibility...