A test will most likely be an accurate predictor of the job performance of a person with a disability when it most directly or closely measures actual skills and ability needed to do a job...
Search Results "Unit of Measurement"
Commonly Searched Documents
-
1. If a test screens out or tends to screen out an individual with a disability or a class of such individuals on the basis of disability, it must be job-related and consistent with business necessity
-
II. Overview of Requirements
Public accommodations must -- Provide goods and services in an integrated setting, unless separate or different measures are necessary to ensure equal opportunity. ...
-
Addendum A: List of Terms
Wheelchair seat height- The distance measured from the floor to the top of the wheelchair seat cushion. This distance is measured at the center of the seat....
-
4.3.5.2 180-degree turn
Findings from the Anthropometry of Wheeled Mobility Study indicate that a width of at least 130 cm (51 in.) was required for 50% of the manual wheelchair users measured in this study to...
-
Wheelchair Accessible Telephones
Section 217.2 of the 2010 Standards provides that where one or more single units are provided, only one unit per floor, level, or exterior site is required to be wheelchair accessible....
-
2.6
2.6 Except as permitted by Section 8.3, the United States shall be prohibited from filing suit, from encouraging others to file suit, or assisting others in filing suit against Cinemark...
-
Compliance Requirements in Final Rule
The technical requirements also include design criteria for parking spaces within camping units and picnic units with mobility features; pull-up spaces for recreational vehicles at dump...
-
26. WEBSITES
If, during the term of this Consent Decree, the United States Department of Justice issues regulations setting standards for the accessibility of websites of public accommodations after...
-
11B-213.3.6 Bathing facilities
Transfer type shower compartments shall be permitted in transient lodging guest rooms, multi-bedroom housing units in undergraduate student housing and residential dwelling units; and shall...
-
Place of Public Accommodation
Provides guest rooms for sleeping for stays that primarily are short-term in nature (generally 30 days or less) where the occupant does not have the right to return to a specific room or unit...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
M302.2.1 Adjustability (Section-by-Section Analysis)
high transfer position of 25 inches; (3) at least four additional transfer positions located between the low and high transfer positions and separated by one inch minimum increments; (4) measured...
-
407.2.2.3 Audible Signals
The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. EXCEPTIONS: 1....
-
407.2.2.3 Audible Signals
The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. EXCEPTIONS: 1....
-
2.5.2.2 International Organization for Standardization (ISO) Standards
The risk mitigation measures must also be assessed to confirm their effectiveness at reducing the risks to acceptable levels and to ensure that they did not introduce any new hazards or...
-
Supporting Documents for the Medical Diagnostic Equipment Accessibility Standards Advisory Committee Report
Subcommittee Report - Weight Scales IDeA Center Memo – Transfer Surface Dimensions IDeA Center Memo - Mammography Knee Clearance Depth and Footrest Clearance IDeA Center Memo - Wheelbase Measurements...
-
Is a transportation operator required to procure vehicles with lifts that have a design load of more than 600 pounds?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and that the lift platform accommodate a wheelchair measuring 30 inches by 48 inches....
-
Is a transportation operator required to procure vehicles with lifts that have a design load of more than 600 pounds?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and that the lift platform accommodate a wheelchair measuring 30 inches by 48 inches....
-
If the Passenger Poses a Direct Threat to the Health and Safety of Others
that person to provide a medical certificate stating that the disease at its current stage would not be transmittable during the normal course of a flight or, if applicable, describing measures...
-
11B-411.2.1.2.3 Accessibility function button
The dots shall be spaced ¼ inch (6.4 mm), measured center to center, in the form of an equilateral triangle with a vertex pointing up. ...
-
11B-411.2.2.2 Verbal identification
Auditory volume shall be at least 10 dB above ambient sound level, but shall not exceed 80 dB, measured 36 inches (914 mm) in front of the elevator entrance and at 48 inches (1219 mm) above...
-
407.2.2.3 Audible Signals
The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. EXCEPTIONS: 1....
-
703.3.1 Dimensions and Capitalization
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059...
-
Forward Reach [4.2.5]
Forward reaches are measured to the edge of available clear floor space. This accommodates high and low reaches and assumes some forward bending....