Prepared by: Vaughan W. Inman Science Applications International Corporation and Gregory W. Davis Federal Highway Administration, RD&T 6300 Georgetown...
Search Results "Pedestrian Circulation Path"
-
Synthesis of Literature Relevant to Roundabout Signalization to Provide Pedestrian Access - Final Report
- Access Board: Protruding Objects - Post Mounted Objects
- Access Board: Design Solutions for Common Protruding Objects
- Access Board: Standards Regarding Protruding Objects
-
R209.2 Alterations
Existing pedestrian signals shall comply with R209.1 when the signal controller and software are altered, or the signal head is replaced....
-
§ 36.403 Alterations: Path of travel
§ 36.403 Alterations: Path of travel....
-
Issue 3: Which signal? Speech WALK messages necessary
Pedestrians standing at one crosswalk could mistake the message of the other crosswalk for their indication to begin crossing....
-
Significant alternatives which minimize any significant economic impacts on small entities
Accessible pedestrian signals and pedestrian pushbuttons required when pedestrian signals newly installed or replaced at signalized intersections (see R209)....
-
R202.3.2 Transitional Segments
Transitional segments of pedestrian access routes shall connect to existing unaltered segments of pedestrian circulation paths and shall comply with R302 to the extent practicable....
-
Pushbutton-integrated APS
(See Interfacing Accessible Pedestrian Signals with Traffic Signal Control Equipment.) ...
-
R302.6.2 Midblock Pedestrian Street Crossings
R302.6.2 Midblock Pedestrian Street Crossings....
-
R302.3.1 Medians and Pedestrian Refuge Islands
R302.3.1 Medians and Pedestrian Refuge Islands. The clear width of pedestrian access routes within medians and pedestrian refuge islands shall be 1.5 m (5.0 ft) minimum....
-
R302.3.1 Medians and Pedestrian Refuge Islands
R302.3.1 Medians and Pedestrian Refuge Islands. The clear width of pedestrian access routes within medians and pedestrian refuge islands shall be 1.5 m (5.0 ft) minimum....
-
Vibrotactile WALK indications
Vibrotactile WALK indications Vibrotactile indications are transmitted by a vibrating plate or arrow on the housing of the pedestrian pushbutton....
-
Issue 13: Stub poles
Flexibility in requirements may make it easier to install usable facilities for pedestrians....
-
Issue 12: Audible beaconing
or during every pedestrian phase....
-
6.13 Outdoor Constructed Features
Where provided on circulation paths or beach access routes at beaches, outdoor constructed features such as picnic tables, grills or water hydrants, shall comply with technical provisions...
-
Dumpster Enclosure
Just as an FYI, Texas has a Technical Memorandum that briefly addresses dumpster enclosures. It is TM 2013-21.
-
Issue 15: Installation Errors Increase Risk
It takes this deaf-blind pedestrian nine seconds to get to the crosswalk after detecting the vibrotactile signal....
-
Shared Use Paths
The preamble to the proposed rule indicated that the proposed scoping and technical requirements for trails would apply to shared use paths....
-
Issue 5: Tactile arrow (in line)
Even small misalignments can inadvertently direct a blind pedestrian outside the crosswalk area or into the parallel traffic. Remedy: The APS needs to be removed and reinstalled....
-
Audible WALK indications
Audible WALK indications Audible WALK indications are broadcast from a speaker that is incorporated into the pedestrian pushbutton housing....
-
Appendix: Checklist for APR Installations
Appendix: Checklist for APR Installations (adapted from “Accessible Pedestrian Signals: A Guide to Best Practice”, NCHRP Web-only document 117A)....
-
Accessible Room Set-Up
Accessible Room Set-Up Once an accessible site is selected, it is essential that the meeting room furniture be arranged to allow everyone to fully participate. An accessible floor...