The requirement in the 1991 Standards that handrails extend horizontally at least 12 inches beyond the width of one tread at the bottom of a stair was changed in the 2004 ADAAG by the Access...
Search Results "Ramp Width"
Filters
Commonly Searched Documents
-
Sections 505.10.2 and 505.10.3
-
Sharing an Access Aisle
Requirements for access aisles in section 502.3 address width, length, marking, and location. Two spaces are permitted to share an access aisle....
-
809.2.2 Turning Space
EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm) maximum in depth or width. Advisory 809.2.2 Turning Space....
-
5.3.2 Transfer Sides Recommendations for M301
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
809.2.2 Turning Space
EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm) maximum in depth or width. Advisory 809.2.2 Turning Space....
-
Showers
Several commenters requested that the final Guidelines provide dimensions on the appropriate width and height of showers and shower doors....
-
In-swinging Bathroom Doors
Once a minimum door width is provided, a tenant who finds a bathroom not readily usable can have the door rehung as an outswinging door....
-
Other Sources
The Access Board used anthropometric data and other standards for the width of transfer surfaces on diagnostic equipment used by patients in a seated position (see M302.2.2), height of breast...
-
Sargent 8888 Reversible Rim Exit Device
The 8888 is designed for standard width stile applications on wood and metal doors and has 7 functions determined by the trim function....
-
Inpro Corporation JointMaster® 441 Series-Recessed Mount Expansion Joint
cover plate finishes available Exposed fastener for easy maintenance Key Specifications Floor/Floor, Floor/Wall Conditions Movement: +/- 50% Joint width...
-
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
linear waviness Installation not weather sensitive Utilizes lubricant adhesive (JPR004) Key Specifications: Architectural Compression Seals Joint width...
-
Whitehall Mfg. 4121ADA One-Station Compact Scrub Sink
Product Details Material: Stainless Steel Brand: Scrub-Ware Fixture Width: 36" Accessibility: ADA (if mounted at compliant height) Waste Location...
-
Grainger Anti Ligature Toilet Paper Holder
Specs Item: Toilet Paper Holder Color: Silver Material:Stainless Steel Finish: Stainless Steel Mounting: Wall Capacity: 4" Roll Width...
-
Whitehall Mfg. 4123ADA Three-Station Compact Scrub Sink
This is a three-station unit measuring 108" wide Product Details Material: Stainless Steel Brand: Scrub-Ware Fixture Width: 108" Accessibility: ADA...
-
Whitehall Mfg. 4122ADA Two-Station Compact Scrub Sink
Product Details Material: Stainless Steel Brand: Scrub-Ware Fixture Width: 72" Accessibility: ADA (if mounted at compliant height) Waste Location...
-
Designed Use
For example, on a trail with Managed Uses of all-terrain vehicle and Motorcycle, all-terrain vehicle use would be the Designed Use because this use requires wider tread widths and has lower...
-
11B-307.3 Post-mounted objects
Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3....
-
382.97 To which aircraft does the requirement to provide boarding and deplaning assistance through the use of lifts apply?
At U.S. airports where lift or ramp boarding is required, the requirement applies to aircraft with 19 or more passenger seats, with a few stated exceptions....
-
Passenger Drop-off Locations
If a curb separates the access aisle from an accessible route, a curb ramp must be provided so that people with disabilities can get to the accessible route leading to the accessible entrance...
-
Play Components
For the purpose of the guidelines, ramps, transfer systems, steps, decks, and roofs are not considered play components....
-
307.3 Post-Mounted Objects
EXCEPTION: The sloping portions of handrails serving stairs and ramps shall not be required to comply with 307.3....
-
Platform Size and Surface
In addition, changes in level between ¼ to ½ inch must be beveled with a slope 1:2 maximum; changes in level more than ½ inch must be treated as a ramp....
-
Required Compliance [§210]
., ramp or elevator) are not required to meet the Standards, but handrails must comply when stairs that are part of a means of egress are altered (§210.1, Ex. 2)....
-
11B-307.3 Post-mounted objects
Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3. ...
