The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves,...
Search Results "Plumbing Element"
-
11B-604.3.2 Overlap
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm)...
-
Verify Rough Plumbing
VERIFY ROUGH PLUMBING – remember finish material thicknesses!...
-
Verify Rough Plumbing
VERIFY ROUGH PLUMBING – remember finish material thicknesses!...
-
Parallel Approach to Kitchen Sinks
Comment. Commenters recommended that a parallel approach should be allowed at kitchen sinks in spaces without a cook top or conventional range, consistent with the ANSI A117.1...
-
608.3.1 Transfer Type Shower Compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall. Figure 608.3.1 Grab Bars...
-
608.3.1 Transfer Type Shower Compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall.
-
2. Roll-in Shower Size
2. If there are more than 50 guestrooms/suites, are all required roll-in showers at least 30" wide by 60" long or 36" wide by 60", as configured in Figure 57 below, so persons who...
-
608.3.1 Transfer Type Shower Compartments
608.3.1 Transfer Type Shower Compartments. In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the...
-
Q. Other Showers in Accessible Guestrooms/Suites
Q. Other Showers in Accessible Guestrooms/Suites - Accessible guestrooms/suites that are not required to have roll-in showers may have an accessible bathtub, a small shower as shown...
-
Sinks [4.24]
Sinks [4.24] ADAAG provides technical specifications for both "lavatories" and "sinks." Requirements for lavatories in ADAAG 4.19 apply to fixtures for hand washing in toilet or...
-
4.24.3 Knee Clearance
Knee clearance that is at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided underneath sinks.
-
4.24.3 KNEE CLEARANCE
Knee clearance that is at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided underneath sinks.
-
Bathtub
Bathtub Grab Bars. As getting in and out of a tub is generally considered to be a falls risk for individuals, designers were not encouraged to promote independent bathing in...
-
11B-608.3.1 Reserved
11B-608.3.1 Reserved.
-
11B-211 Drinking fountains and bottle filling stations
11B-211 Drinking fountains and bottle filling stations
-
11B-608.3.1 Transfer type shower compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (457 mm) from the control wall.
-
11B-602 Drinking fountains and bottle filling stations
11B-602 Drinking fountains and bottle filling stations
-
Geberit Monolith Installation
Installation of Geberit Monolith Water Closet
-
F203.2 Existing Elements
Elements in compliance with an earlier standard issued pursuant to the Architectural Barriers Act or Section 504 of the Rehabilitation Act of 1973, as amended, shall not be required to comply...
-
Plumbing Elements and Facilities
[See subsections ...]
-
11B-212.3 Sinks
Scrub sinks, as defined in California Plumbing Code Section 221.0, shall not be required to comply with Section 11B-606....
-
11B-212.3 Sinks
Scrub sinks, as defined in California Plumbing Code Section 221.0, shall not be required to comply with Section 11B-606....
-
604.8 Toilet Compartments
Compartments containing more than one plumbing fixture shall comply with 603. Ambulatory accessible compartments shall comply with 604.8.2 and 604.8.3....
