Shower compartments shall have sizes and clearances complying with 608.2.
Search Results "Plumbing Element"
-
608.2 Size and Clearances for Shower Compartments
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch...
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing...
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment. EXCEPTION: A lavatory complying...
-
608.2.3 Alternate Roll-In Type Shower Compartments
Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
608.3.1 Transfer Type Shower Compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall. Figure 608.3.1 Grab Bars...
-
608.3.2 Standard Roll-In Type Shower Compartments
Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be...
-
608.3.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided...
-
608.5.1 Transfer Type Shower Compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches...
-
608.5.2 Standard Roll-In Type Shower Compartments
In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the...
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the...
-
CHAPTER 6: PLUMBING ELEMENTS AND FACILITIES
Chapter 6 covers the current ADA Standards for plumbing elements and facilities....
-
212 Kitchens, Kitchenettes, and Sinks
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 212.2...
-
11B-211 Drinking fountains.
-
11B-211 Drinking fountains and bottle filling stations
11B-211 Drinking fountains and bottle filling stations
-
11B-211 Drinking fountains and bottle filling stations
11B-211 Drinking fountains and bottle filling stations
-
11B-211 Drinking fountains and bottle filling stations
11B-211 Drinking fountains and bottle filling stations
-
11B-212.3 Sinks
Scrub sinks, as defined in California Plumbing Code Section 221.0, shall not be required to comply with Section 11B-606....
-
11B-212.3 Sinks
Scrub sinks, as defined in California Plumbing Code Section 221.0, shall not be required to comply with Section 11B-606....
-
11B-212.3 Sinks
Scrub sinks, as defined in California Plumbing Code Section 221.0, shall not be required to comply with Section 11B-606....
-
11B-212.3 Sinks
The California Plumbing Code (CPC) definition for "Scrub Sink", referenced in 11B-212.3 Exception 2 is as follows: Scrub Sink [OSHPD 1, 2, 3 & 4]. ...
-
11B-213.2.1 Unisex (single-user or family) toilet and unisex (single-user or family) bathing rooms
Unisex (single-user or family) toilet rooms shall contain not more than one lavatory, and not more than two water closets without urinals or one water closet and one urinal. Unisex...