The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
11B-904.3.2 Counter
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
-
[A] 101.3 Intent
The purpose of this code is to establish the minimum requirements to safeguard the public health, safety and general welfare through structural strength, means of egress facilities, stability...
-
8. Can an elevated crawl tube be used to connect to a play component required to be accessible? Can that crawl tube also be considered an accessible play component?
Yes, where transfer access is provided on a composite play structure elevated play components such as a crawl tube are permitted to connect to other play components....
-
Section 2. Covered multifamily dwellings
Dwelling units within a single structure separated by firewalls do not constitute separate buildings....
-
4.21.3 SEAT
The structural strength of seats and their attachments shall comply with 4.26.3....
-
4.6.2 LOCATION
In separate parking structures or lots that do not serve a particular building, parking spaces for disabled people shall be located on the shortest possible circulation route to an accessible...
-
Gates and Barriers on Beach Access Routes
Refer to the FSORAG for the technical provisions for gates and barriers....
-
601.1 Scope
The technical requirements in Chapter 6 shall apply to ICT support documentation and services where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements)...
-
Associated Constructed Feature
Refer to the FSORAG for the technical provisions for associated constructed features....
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum...
-
T704 Announcement Systems
The technical requirement in the final rule for stop request systems on buses and vans are similar to the existing guidelines. See 36 CFR 1192.37....
- Allegion Von Duprin 98/99 Series AX Intro Video
- Easterseals Superior California
- Jackson Center for Independent Living (JCIL) - Jackson, TN
-
602.6 Water Flow
The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit....
-
604.7 Dispensers
Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser...
-
Building
One commenter suggested that the Department use the term "structure" in lieu of "building"....
-
QUESTION: WHAT CONSTITUTES AN ALTERATION TO A PLATFORM FOR PURPOSES OF TRIGGERING THE APPLICATION OF SECTION 37.42 REQUIREMENTS?
37.3 defines an alteration as “a change to an existing facility including, but not limited to, remodeling, renovation, rehabilitation, reconstruction . . . changes or rearrangement in structural...
-
208.2.3.1 Parking for Residents, F208.2.3.1 Parking for Residents
208.2.3.1 Parking for Residents F208.2.3.1 Parking for Residents The final rule edits the references in these sections to the technical requirements for residential dwelling units with...
-
208.3.2 Residential Facilities, F208.3.2 Residential Facilities
208.3.2 Residential Facilities F208.3.2 Residential Facilities The final rule edits the references in these sections to the technical requirements for residential dwelling units with...
-
228.2 Mail Boxes, F228.2 Mail Boxes
228.2 Mail Boxes F228.2 Mail Boxes The final rule edits the references in these sections to the technical requirements for residential dwelling units with mobility features to conform...
-
Section-by-Section Analysis
Chapter R3 contains technical requirements....