The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
11B-904.3.2 Counter
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
-
904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
Ultimate Guide to Mastering Word Puzzle Fun With Wordle Unlimited
The simple interface and repetitive structure allow players to focus without distractions....
-
Van Accessible Parking Spaces
Technical specifications for van spaces provide for a wider access aisle to better accommodate lift-equipped vehicles. Many comments considered this number to be wholly insufficient....
-
6. Discussion of Final Rule
Appendix D contains the technical requirements for facilities covered by the ADA and the ABA....
-
Documenting Exceptions
When work necessary to meet the technical requirements would directly or indirectly substantially harm the protected aspect, document the reason for the determination and then apply the...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum...
-
Ampetronic MLD7 MultiLoop Driver Hearing System
Most commonly used design types are low loss and low spill: MultiLoop™ Low Loss Systems are used to: Compensate for high losses due to metal structures Drive large areas where...
-
Ampetronic MLD5 MultiLoop Driver Hearing System
Most commonly used design types are low loss and low spill: MultiLoop™ Low Loss Systems are used to: Compensate for high losses due to metal structures Drive large areas where...
-
602.6 Water Flow
The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit....
-
604.7 Dispensers
Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser...
-
ADOPTION OF A 19 INCH HEIGHT MINIMIZES COSTS TO HEALTH CARE PROVIDERS
OF A 19 INCH HEIGHT MINIMIZES COSTS TO HEALTH CARE PROVIDERS In the absence of Committee consensus commending a departure from the existing broadly accepted transfer surface height maximum...
-
1006 Golf Facilities
Technical criteria are provided for golf car passages, accessible routes, teeing grounds, putting greens, and weather shelters....
-
Analysis of Transfer Surface Dimensions Based on Wheeled Mobility User Anthropometry
IDeA Center, University at Buffalo Memorandum: Date: 10/23/2012 From: Clive D’Souza and Edward Steinfeld, IDeA Center, University at Buffalo To: Rex Pace, Technical Assistance...
-
V. Major Issues
major issues addressed in this NPRM are: (a) scope of covered electronic content; (b) incorporation by reference of WCAG 2.0; (c) relationship between functional performance criteria and technical...
-
5.1.2 Level or Sloped Entry
Camp shelters providing roll-in access shall have a level or sloped entry that complies with the FSORAG Outdoor Recreation Access Route technical provisions if the camp shelter is in a campground...
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADAS] 703.5.7 Stroke Thickness. ...
-
407.12.3.1 Unobstructed Forward Reach
Where the operable part is located at the leading edge of the maximum protrusion within the length of the vertical reference plane of the ICT, the operable part shall be 48 inches (1220...
-
505.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6 1/4 inches (160 mm) maximum, and a cross-section dimension...
-
505.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6 1/4 inches (160 mm) maximum, and a cross-section dimension...
-
11B-809.8 Doors
., concrete, brick, flagstone) may have a maximum change in height from the interior landing of 4 inches (102 mm)....
-
Section 36.303(g)(5) Performance Requirements for Captioning Devices and Audio Description Devices
For example, a few commenters proposed that the Department define specific quantifiable and technical standards, and several commenters suggested that the Department develop a program to...
-
Ramps M303:3.3, 3.3.1, 3.3.2
Ramps M303:3.3, 3.3.1, 3.3.2 M303.3 Proposed Provision: Changes in Level at Entry to Wheelchair Spaces includes technical criteria for changes in level at the entry to a wheelchair space...
