transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm) maximum...
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
Filters
Commonly Searched Documents
-
608.5.1 Transfer Type Shower Compartments
-
1.1.5
1.1.5 A maximum design cross slope for accessible exterior pedestrian paving and ramps of 1.5% (1:67 or about 3/16 in. per ft. [15 mm per m]) is recommended....
-
11B-1009.3.2 Submerged depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
11B-407.4.6.1 Location
Exceptions: Where the elevator panel serves more than 16 openings and a parallel approach is provided, buttons with floor designations shall be permitted to be 54 inches (1372 mm) maximum...
-
11B-602.2 Clear floor space
Exception: A parallel approach complying with Section 11B-305 shall be permitted at units for children's use where the spout is 30 inches (762 mm) maximum above the finish floor or ground...
-
11B-1009.3.2 Submerged depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
11B-610.2 Bathtub seats
The top of bathtub seats shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
-
Trailheads
Accessible outdoor constructed features, elements, spaces, and facilities within the trailhead In alterations to existing trailheads, where there is a condition for an exception, the technical...
-
5.1.1 Transfer Surface Height Adjustability Recommendation for M301 and M302
industry proposed creating a System Accessibility Configuration to provide a means to achieve accessibility where equipment’s current design is limited or achieving accessibility is not technically...
-
Landscape Forms Inc. Arcata Collection Benches
With robust structure and visual sweep, Arcata meets the measure of expansive outdoor spaces offering a unique combination of classic and contemporary forms....
-
4.13.11* Door Opening Force
The maximum force for pushing or pulling open a door shall be as follows:...
-
Sections 35.101 and 36.101—Purpose and Broad Coverage
Amendments Act’s purpose of reinstating a broad scope of protection under the ADA, the definition of ‘‘disability’’ in this part shall be construed broadly in favor of expansive coverage to the maximum...
-
M305 Supports (Section-by-Section Analysis)
M305 in the final rule provides the technical requirements for transfer supports, standing supports, leg supports, and head and back supports....
-
1. What is considered an "accessible" play component?
An "accessible" play component is one that is located on an accessible route and meets the technical provisions of Section 1008.4. Remember, the standards are only minimums....
-
F.2. - What should be included in a nonavailability determination?
FAR 39.203(c)(2) requires that the documentation must include a description of market research performed and identification of the applicable technical provisions that cannot be met with...
-
9.1.1 General
All public use and common use areas are required to be designed and constructed to comply with section 4 (Accessible Elements and Spaces: Scope and Technical Requirements)....
-
E101.1 Purpose
These 508 Standards, which consist of 508 Chapters 1 and 2 (Appendix A), along with Chapters 3 through 6 (Appendix C), contain scoping and technical requirements for information and communication...
-
ACKNOWLEDGMENTS
Ann Do is the Contracting Officer's Technical Representative....
-
FAQ: Does the content go through a Quality Control process?
including images, products from external websites, links to external websites, and videos, goes through extensive quality control (QC) processes, including review by at least one of ETA’s technical...
-
[A] APPROVED
material, type of construction, fixture or appliance as the result of investigations and tests conducted by the agency, or by reason of accepted principles or tests by national authorities or technical...
-
APPROVED
material, type of construction, fixture or appliance as the result of investigations and tests conducted by the agency, or by reason of accepted principles or tests by national authorities or technical...
-
Introduction
The ABA Standards are comprised of two types of provisions: scoping requirements and technical requirements....
-
233.1 General
For example, the Fair Housing Act requires that certain residential structures having four or more multi-family dwelling units, regardless of whether they are privately owned or federally...
-
About the Author
He worked as the east zone structural engineer for the Eastern Region and as a civil engineer for the Ashley and Tongass National Forests before coming to MTDC....
