The force required to push or pull open the interior hinged doors to the restroom vestibule door is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf....
Search Results "Maximum Dimension"
-
Restrooms Main Lobby
-
24. Q: Are there tax credits or deductions available to help offset the costs associated with complying with the ADA?
This credit can cover 50% of the eligible access expenditures in a year up to $10,250 (maximum credit of $5,000)....
-
608.6 Shower Spray Unit and Water
Shower spray units shall deliver water that is 120°F (49°C) maximum....
-
11B-610.3 Shower compartment seats
The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
-
Audible Hall Signals
The proposed rule included a maximum frequency (1,500 Hz) for audible signals....
-
Clear space
Space data was recorded as the maximum distance away from the A15/A16 reference line to the right (right of center), the maximum distance away from the A15/A16 reference line to the left...
-
11B-610.3 Shower compartment seats
The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
-
11B-608.6 Shower spray unit and water
Shower spray units shall deliver water that is 120°F (49°C) maximum....
-
11B-608.6 Shower spray unit and water
Shower spray units shall deliver water that is 120°F (49°C) maximum....
-
11B-1003.3.2 Boarding pier clearances
Every 10 feet (3048 mm) maximum of linear pier edge shall contain at least one continuous clear opening 60 inches (1524 mm) wide minimum. Exceptions: 1. ...
-
1003.3.2 Boarding Pier Clearances
Every 10 feet (3050 mm) maximum of linear pier edge shall contain at least one continuous clear opening 60 inches (1525 mm) wide minimum. EXCEPTIONS: 1....
-
Protocol C Heights Obtained
For the maximum height transfers HERL's percentile heights were slightly higher for the 25th and 75th percentiles than the NDVWSC heights....
-
1003.3.2 Boarding Pier Clearances
Every 10 feet (3050 mm) maximum of linear pier edge shall contain at least one continuous clear opening 60 inches (1525 mm) wide minimum. EXCEPTIONS: 1....
-
Belson Outdoors Recycled Plastic Universal Access Picnic Table
Table top and seats come in 2" x 10" or 2" x 6" nominal dimensioned planks. Wheelchair accessible tables are identified "Universal Access" by a blue end cap....
-
Diadema 80 Interior Wall Sconce by Hampstead
Stock Number: 17085 Dimensions: H:5.2" L:32" E:3.92" Diffuser: Hand-Crafted Transparent Glass Tubes Finish: Chrome Color: Clear Glass Bulb: 1 x 55W 2G11FL Certification...
-
Bobrick Koala Kare Countertop Recess Mounted Baby Changing Station KB112-01RE
Unit Dimensions: 32” W x 19⅝” L (812 x 497 mm) Depth (closed): 3” (76 mm) Shipping Weight: 6 lbs...
-
American Dryer, Inc Advantage™ AD Automatic Hand Dryer
Heating element operates in the black range for maximum life. 5-year Limited Warranty Includes same-day factory repair or part replacement....
-
608.3.3 Alternate Roll-In Type Shower Compartments
Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls. Figure 608.3.3 Grab Bars for Alternate Roll-In Type Showers...
-
11B-604.8.3 Coat hooks and shelves
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor. ...
-
Cross Slope
Comments indicated that specifications for cross slope (1:48 maximum) are not referenced in the curb ramp section. Response....
-
§382.133(a)
disability to use in the passenger cabin during air transportation an electronic assistive device specified in paragraph (c) of this section on all aircraft originally designed to have a maximum...
-
Width and Length
Width and Length Transfer walls must be a minimum of 12 inches wide to a maximum of 16 inches wide....
-
703.2.5 Character Height
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
F239.2 Minimum Number
If a course is designed with the minimum 50 percent accessible holes, designers or operators are encouraged to select holes which provide for an equivalent experience to the maximum extent...
