For purposes of this requirement, a “large transit entity” is defined as a provider of public transportation that operates 100 or more buses in annual maximum service for all fixed route...
Search Results "Maximum Dimension"
Commonly Searched Documents
-
Summary of Significant Changes
-
M307 Operable Parts
The Wheeled Mobility Anthropometry Project recommended that the 5 pounds maximum force be retained for other types of operable parts....
-
M305.2.3 Height (Section-by-Section Analysis)
The Access Board sought input from the public in question 20 of the MDE NPRM preamble, on whether a transfer support height requirement of 6 inches minimum and 19 inches maximum above the...
-
Accessible Fishing Piers and Platforms
Sections 237 and 1005 of the 2010 Standards require at least twenty-five percent (25%) of railings, guards, or handrails (if provided) to be at a 34-inch maximum height (so that a person...
-
Kitchen Appliances
Appliance manufacturers called attention to various appliances that cannot be easily redesigned to meet the maximum 5 pounds of force....
-
11B-206.2.7 Press boxes
accessible route shall not be required to press boxes in bleachers that have points of entry at only one level provided that the aggregate area of all press boxes is 500 square feet (46 m2) maximum...
-
F206.2.7 Press Boxes
accessible route shall not be required to press boxes in bleachers that have points of entry at only one level provided that the aggregate area of all press boxes is 500 square feet (46 m2) maximum...
-
206.2.7 Press Boxes
accessible route shall not be required to press boxes in bleachers that have points of entry at only one level provided that the aggregate area of all press boxes is 500 square feet (46 m²) maximum...
-
804.3 Kitchen Work Surface (Exception)
provided at kitchen counters where a table is provided within the kitchen; an electric outlet is provided within reach of the table; and all the kitchen countertops are 34 inches high maximum...
-
Gangway Slope and Rise Exceptions
As a minimum however, gangways must be designed to provide for a maximum 1:12 (8.33%) slope but are not required to be longer than 80 feet in length....
-
BACKGROUND
such equipment is accessible to, and usable by, individuals with accessibility needs, and shall allow independent entry to, use of, and exit from the equipment by such individuals to the maximum...
-
11B-206.2.7 Press boxes
accessible route shall not be required to press boxes in bleachers that have points of entry at only one level provided that the aggregate area of all press boxes is 500 square feet (46 m2) maximum...
-
11B-206.2.7 Press boxes
accessible route shall not be required to press boxes in bleachers that have points of entry at only one level provided that the aggregate area of all press boxes is 500 square feet (46 m2) maximum...
- Learning Disabilities Worldwide
- Inclusion Solutions Voting Booth Accessories Franklin Voting Chair
- World Dryer Nova 1® Hand Dryer
- TrueForm 30" ADA Floating Concrete Sink FLO-30-ADA
- Behavioral Safety Products #TC230 Suicide Resistant Standard Trap Cover
- Delta Two Handle Widespread Lavatory Metal Pop-Up 3594-MPU-DST
-
Alterations
When pools are altered, the alterations must comply with the 2010 Standards, to the maximum extent feasible....
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
403.5.3 Passing Spaces
An accessible route with a clear width less than 60 inches (1525 mm) shall provide passing spaces at intervals of 200 feet (61 m) maximum....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Accessible Routes
Accessible route requirements in ADAAG address width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...