requirements Modular designs allow us to build around obstacles on site All aluminum construction Code compliant 1:12 slope ramps ADA platforms designed for maximum...
Search Results "Maximum Dimension"
Filters
Commonly Searched Documents
-
Seating Solutions ADA Platforms, Ramps & Stairs
-
Hussey Seating Company Flip-Up Armrest
Can be used for standard seating when maximum capacity is required....
-
GE® 24" Standard Clean Free-Standing Electric Range JAS02SNSS
Handle Color Stainless Steel Handle Design D-shaped Claims and Certifications ADA Compliant Weights and Dimensions...
-
Bradley Contemporary Series Recess Mounted Soap Dispenser 6437
Installation Verify all rough-in dimensions prior to installation. Requires rough wall opening 8½"W x 4½"H x 4"D....
-
Door King Inc. 1803 Telephone Entry System
Surface mount dimensions: 13"H x 11.25"W x 4.5"D. Flush mount dimensions: 13.25"H x 12"W x 3"D. Options: Surface or flush mount - specify which....
-
Categorization of wheelchair versus other power-driven mobility devices. (Section-by-Section Analysis)
A few commenters thought it would be appropriate to categorize the devices based on their maximum speed....
-
Appendix 4 – References
Determination of new dimensions for universal design codes and standards with consideration of powered wheelchair and scooter users. Manitoba, CA: Universal Design Institute....
-
Shower and Sauna Doors in Transient Lodging Facilities
All saunas except for custom-made saunas are made to manufacturers’ standard dimensions....
-
Assessment Factors
Assessment Factors In deciding whether a particular type of OPDMD can be accommodated in a particular facility, the following factors must be considered: the type, size, weight, dimensions...
-
3. Terminology
E1364 or dynamically using a rolling inclinometer per Test Method E2133. 3.1.1.2 traveled surface roughness—the deviations of a surface from a true planar surface with characteristics dimensions...
-
Wheeled Mobility Anthropometry Project
seat heights of many mobility devices are above the range specified in the 2004 ADA and ABA Accessibility Guidelines for certain architectural features that involve transfers and that the dimensions...
-
Which transition type do users with disabilities prefer?
When a sidewalk slopes more than 2% in the direction of travel and a walk with a maximum 2% cross slope intersects it, which transition segment type provides the safest usability for the...
-
229 Windows
Commenters generally supported this provision but some commenters asked whether the maximum five-pounds (5 lbs.) of force requirement of section 309 applies to the window latch itself or...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. [2010 ADAS] Advisory 303.3 Beveled. ...
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
Pushbutton locator tone
The 2003 MUTCD requires that locator tone volume be carefully adjusted to be audible a minimum of 1.8 m (6 feet) and a maximum of 3.7 m (12 feet) from the pushbutton, or to the building...
-
M303.4.1 Breast Platform Adjustability (Section-by-Section Analysis)
The MDE NPRM proposed a mammography breast platform height range of 30 inches high minimum and 42 inches high maximum above the floor....
-
608.3.2 Standard Roll-In Type Shower Compartments
Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
410.6 Doors and Gates
EXCEPTION: Platform lifts serving two landings maximum and having doors or gates on opposite sides shall be permitted to have self-closing manual doors or gates....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space,head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
R304.5.3 Cross Slope
The cross slope of curb ramps, blended transitions, and turning spaces shall be 2 percent maximum....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
