At the end of the transition period provided for in subpart C, such housing shall be available in sufficient quantity and variety so that the scope of handicapped students' choice of living...
Search Results "Control End Wall"
Commonly Searched Documents
-
§104.45(a) Housing provided by the recipient
-
R305.2 Placement
Where the back of curb edge is tooled to provide a radius, the border dimension should be measured from the end of the radius....
-
§ 38.113(a)(2)
(2) Doorways at ends of cars connecting two adjacent cars, to the maximum extent practicable in accordance with regulations issued under the Federal Railroad Safety Act of 1970 (49 CFR parts...
-
711.3.3 Ducts and air transfer openings
Penetrations of fire-resistance-rated walls by ducts and air transfer openings that are not protected with fire dampers shall comply with this section....
-
4.18.2 Height
Urinals shall be stall-type or wall-hung with an elongated rim at a maximum of 17 in (430 mm) above the finish floor....
-
11B-809.10.8.3 Cabinets
The finished floor shall extend to the wall under the lavatory....
- Pilot Rock TQ700 Square Frame Square Utility Table
- Pilot Rock T700 Square Frame Rectangular Utility Table
-
Protruding Objects
If an object is higher than 27 inches and wall-mounted, it must not protrude more than four inches into the path of travel....
- Bobrick Surface-Mounted Toilet Tissue Dispenser for Two Rolls B-27460
-
Building
The commenter stated that, in the building industry, "building" is defined by exterior walls and fire walls, and that an apartment structure of four units could be subdivided into two separate...
-
Temporary Solutions for Election Day - Hallways and Corridors - Voters Who are Blind or Who Have Low Vision
Temporary Solutions for Election Day Hallways and Corridors - Voters Who are Blind or Who Have Low Vision Problem One: Wall-mounted display case is a protruding object hazard because...
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
607.4 Grab Bars
bathtub located in a bathing facility for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls...
-
607.4 Grab Bars
bathtub located in a bathing facility for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls...
-
4.26.2* SIZE AND SPACING OF GRAB BARS AND HANDRAILS
If handrails or grab bars are mounted adjacent to a wall, the space between the wall and the grab bar shall be 1-1/2 in (38 mm) (see Fig. 39(a), (b), and (c))....
- Federal Elevator 360 Passenger Elevator
-
604.8.2.3 Grab Bars
A side-wall grab bar complying with 604.5.1 shall be provided on both sides of the compartment....
-
604.8.2.3 Grab Bars
A side-wall grab bar complying with 604.5.1 shall be provided on both sides of the compartment....
-
704.2.1 Types I and II construction
Projections from walls of Type I or II construction shall be of noncombustible materials or combustible materials as allowed by Sections 1406.3 and 1406.4....
-
1007.6.3 Two-way communication
Areas of refuge shall be provided with a two-way communication system between the area of refuge and a central control point....
-
1003.2.13.5.3 Two-way communication
Areas of refuge shall be provided with a two-way communication system between the area of refuge and a central control point....
-
G.7.i. - Are procurement actions to maintain existing legacy systems (that do not meet the technical provisions of the Access Board's standards) exempt from Section 508?
For example, if an agency is acquiring "patches" to fix minor software errors on a system that is not near the end of its life expectancy and software that meets the applicable technical...