Grab bars shall be provided on the side wall closest to the water closet and on the rear wall. EXCEPTIONS: 1....
Search Results "Control End Wall"
-
604.5 Grab Bars
-
M303.2.3.2 Pass Through Entry
Where wheelchair space entry and exit permits pass through from one end to the other, the wheelchair space shall be 40 inches deep (1015 mm) minimum....
-
§ 1194.25(a)
(a) Self contained products shall be usable by people with disabilities without requiring an end-user to attach assistive technology to the product. ...
-
R309.2.1.1 Alterations
In alterations where the street or sidewalk adjacent to the parking spaces is not altered, an access aisle shall not be required provided the parking spaces are located at the end of the...
-
14. In § 38.93(d)(3)
In § 38.93(d)(3), remove the period at the end of the paragraph and add the following words: “,ensuring compliance with section 37.42, where applicable.” in its place....
-
§100.7(a)(1)(ii)
(ii) Failing to take prompt action to correct and end a discriminatory housing practice by that person's employee or agent, where the person knew or should have known of the discriminatory...
-
F104.1.1 Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
1007.7.4 Separation
Exterior walls separating the exterior area of assisted rescue from the interior of the building shall have a minimum fire-resistance rating of 1 hour, rated for exposure to fire from the...
-
604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
Grab Bars
Grab bars are required on one side wall and the rear wall....
-
H1
.), is a sign with raised characters and Braille mounted on the wall adjacent to the latch?...
-
4.30.6 Mounting Location and Height
Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
11B-604.9.1 Location
The water closet shall be located with a wall or partition to the rear and to one side....
-
M305.3.2.2 Vertical Position
The height of the lowest end of the gripping surface on vertical standing supports shall be 34 inches (865 mm) minimum and 37 inches (940 mm) maximum above the standing surface....
-
17. In § 38.113, amend paragraph (d)(3)
In § 38.113, amend paragraph (d)(3) by removing the period at the end of the paragraph and adding the words “ensuring compliance with section 37.42, where applicable” in its place....
-
Applying Accessibility Guidelines to Your Site
How did we end up with so many accessibility guidelines and standards? Which guidelines and standards apply to your site?...
-
2. Is this trail primarily surfaced with a material other than asphalt, concrete, or boardwalk?
Yes No If “No” is selected, then skip to “End of Survey” (Qualtrics Option). If “Yes is selected, then skip to Question #3....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
11B-604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and...
-
SafePath SafeShower™ Ramp Transitions
[Some custom rubber product applications may be substituted] These SafeShowerTM ramps come with a built-in side approach or can be ordered with the flares or mitered ends removed for...
-
711.3.2 Membrane penetrations
Where walls and partitions are required to have a minimum 1-hour fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced....
-
Maneuvering Clearances at Doors [4.13.6]
Clearance to the wall plane next to the door (even when the door is in a recess) is essential....
-
11B-407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with Section 11B-407.4.7.2....
