Rest one end of the level at the highest point of the sloped surface and lift the other end (as shown in the illustration) until the bubble is in the middle of the tube....
Search Results "Control End Wall"
Commonly Searched Documents
-
Taking Measurements
-
Parallel Parking Spaces (R309.2) (Section-by-Section Analysis)
In alterations where the street or sidewalk adjacent to the parking spaces is not altered, an access aisle is not required provided the parking spaces are located at the end of the block...
-
5.3.2.1 Transfer Sides Recommendation for Stretchers
The configuration of stretchers typically does not allow access to a transfer surface on either end....
-
4.4.4 Clear Floor or Ground Space
A clear floor or ground space of 36 inches (915 mm) by 48 inches (1220 mm) shall be located at an end the bench with one side of the space adjoining an accessible route, outdoor recreation...
- Bobrick Folding Shower Seat B-5191
-
7(2)(b)(iv)
In locations where toilets are adjacent to walls or bathtubs, the center line of the fixture is a minimum of 1'6" from the obstacle....
-
5.3.4 Grab Bars
Where walls or partitions are provided, grab bars complying with ABAAS section 604.5 shall be provided....
-
3. Protruding Objects
[ADA Stds. 4.4] Note: These objects may be wall mounted or free standing....
-
5.3.4 Grab Bars
Where walls or partitions are provided, grab bars complying with ABAAS section 604.5 shall be provided....
- Just Manufacturing Enviro Series Sensor Single Hole Non-Mixing Backsplash Mount Gooseneck Faucet
- Just Manufacturing Enviro Series Deck Mount Sensor Lavatory Faucet
- Just Manufacturing Enviro Series Sensor Single Hole Non-Mixing Deck Mount Gooseneck Faucet
-
§100.7(a)(2)
(2) For purposes of determining liability under paragraphs (a)(1)(ii) and (iii) of this section, prompt action to correct and end the discriminatory housing practice may not include any...
-
Car Dimensions and Doors: ADA Standard Section 408.4.1
Section 408.4.1 covers the current ADA Standards for the car dimensions and doors of limited-use/limited-application elevators.
-
Clear Floor Space: ADA Standard Section 1004.1
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
ASME
The enclosure walls not used for entry or exit are required to have a grab bar the full length of the wall on platform lifts....
- Salsbury Industries See Through Metal Locker Triple Tier 1 Wide
- Salsbury Industries See Through Metal Locker Double Tier 1 Wide
- Salsbury Industries See Through Metal Locker Double Tier 3 Wide
- Salsbury Industries See Through Metal Locker Triple Tier 3 Wide
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 90-degree Turn
These data are based on measurements of wheeled mobility users performing 90-degree turns in a hallway, built with mock walls. The outside wall of the hallway was fixed....
-
Communication During Leave and Prior to Return to Work
Near the end of the three month leave, the employee requests an additional 30 days of leave....
-
804.2.1 Pass Through Kitchen
In pass through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing...
-
C. Interior Route from St. Francis Street Accessible Entrance to Main Hotel Lobby
Francis Street Accessible Entrance to Main Hotel Lobby: (1) Defendants will provide an accessible opening through the wall north of the glass wall which separates the pre-function room...