Vanities and lavatories shall be installed with the centerline of the fixture a minimum of 18 inches (457 mm) horizontally from an adjoining wall or fixture to allow for forward approach...
Search Results "Control End Wall"
Filters
Commonly Searched Documents
-
1134A.8, Item 1
-
Intensity
Intensity To be effective, a visual signal (or its reflection from adjacent walls and ceiling) must be of an intensity that will raise the overall light level sharply, but not be so intense...
-
1134A.8, Item 1
Vanities and lavatories shall be installed with the centerline of the fixture a minimum of 18 inches (457 mm) horizontally from an adjoining wall or fixture to allow for forward approach...
-
BlueDAG Software and Mobile Application
BlueDAG is a cloud-hosted software system for end-to-end management of ADA evaluation and compliance initiatives....
-
Toilet Buildings and Pit Toilets
recreation sites with only one riser must comply with the requirements for toilet room size and clearances in section 603 of ABAAS and with the requirements for toilet seats, grab bars, controls...
-
§ 37.131(a)(1)(i)
The corridor shall include an area with a three-fourths of a mile radius at the ends of each fixed route....
-
E2-a
[ADA Standards § 4.4.1]    Yes    No Note: These objects may be wall mounted or free standing....
-
Stabila, Inc. Tech Digital Electronic Level Type 196-2
Electronic measuring technology / Two digital displays / Audible inclination guide / IP 65 Dust and Waterproof / Removable shock-absorbing end caps with anti-slip wall grips....
-
11B-609.4 Position of grab bars
The height of the lower grab bar on the back wall of a bathtub shall comply with Section 11B-607.4.1.1 or 11B-607.4.2.1....
-
Height from Finish Floor or Ground: ADA Standard Section 703.5.6
EXCEPTION: Visual characters indicating elevator car controls shall not be required to comply with 703.5.6....
-
II. Systemic Considerations
Training criminal justice personnel, conducting reviews of policies and procedures, and collaborating with mental health and disability services providers are three ways to achieve that end...
-
Pilot Rock APTX Full Sized Pedestal Rectangular Utility Tables
Specifications: FRAME: Two heavy pedestal posts of 3" x 6" x 1/8" wall rectangular steel tubing to support the table top. ...
-
Salsbury Industries 62000 Series Double Tier 1 Wide Standard Metal Lockers
deep 6 foot high lockers have compartment sizes that are 12" wide, 36" high and 12", 15" or 18" deep Available as 1 wide or 3 wide units Each locker compartment features 3 single wall...
-
Salsbury Industries Series Triple Tier 1 Wide Standard Metal Lockers
deep 6 foot high lockers have compartment sizes that are 12" wide, 24" high and 12", 15" or 18" deep Available as 1 wide or 3 wide units Each locker compartment features 3 single wall...
-
Salsbury Industries 62000 Series Double Tier 3 Wide Standard Metal Lockers
deep 6 foot high lockers have compartment sizes that are 12" wide, 36" high and 12", 15" or 18" deep Available as 1 wide or 3 wide units Each locker compartment features 3 single wall...
-
Salsbury Industries 63000 Series Triple Tier 3 Wide Standard Metal Lockers
deep 6 foot high lockers have compartment sizes that are 12" wide, 24" high and 12", 15" or 18" deep Available as 1 wide or 3 wide units Each locker compartment features 3 single wall...
-
Technical Memorandum TM 2013-23 Storage (Not in Kitchens or Kitchenettes)
For purposes of compliance with TAS 225.2, the Department shall consider base and wall cabinets to be the same type of storage if designed the same (i.e. both have doors), used for the same...
-
604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
Signage
Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
The Presentation Area / Speaker’s Platform Design and Considerations
Neither should a presenter using a mobility device be seated at the end of a skirted table instead of with the other presenters....
-
Minimum Number: ADA Standard Section 234.3
Section 234.3 covers scoping requirements in the current ADA Standards for the minimum number of wheelchair spaces required at amusement rides.
-
Bobrick Folding Shower Seat B-517
Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Right-hand seat....
-
Bobrick Folding Shower Seat B-518
Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Left-hand seat....
