An in-tub seat or a seat at the head end of the tub shall be provided as shown in Fig. 33 and 34. The structural strength of seats and their attachments shall comply with 4.26.3....
Search Results "Control End Wall"
-
4.34.5.4(2) Seat
-
M305.3.2 Vertical Position
Where the support is vertical, it shall be 18 inches (455 mm) minimum in length and the bottom end of the support shall be 34 inches (865 mm) high minimum and 37 inches (940 mm) high maximum...
-
Bobrick Reversible Folding Shower Seat B-5181
Seat 33" (840mm) wide, projects 22 5⁄16" (565mm) from wall....
-
Outdoor Rinsing Showers
If self-closing controls or operating mechanisms are used, the controls must remain open for at least 10 seconds....
-
Clear Floor or Ground Space: ADA Standard Section 804.3.1
conditions are met: (a) the cabinetry can be removed without removal or replacement of the kitchen work surface; (b) the finish floor extends under the cabinetry; and (c) the walls...
-
Communication During Leave and Prior to Return to Work
Near the end of the three month leave, the employee requests an additional 30 days of leave....
-
Car Dimensions and Doors: ADA Standard Section 408.4.1
Section 408.4.1 covers the current ADA Standards for the car dimensions and doors of limited-use/limited-application elevators.
-
Clear Floor Space: ADA Standard Section 1004.1
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
11B-806.2.3.1 Personal lift device floor space
to the long side of the bed and extend under the bed to points horizontally 30 inches (762 mm), vertically 7 inches (178 mm) and not more than 12 inches (305 mm) from the head and foot end...
-
Willoughby Industries ETW-1490-FM-HC Floor Mount Wall Outlet Rear Mounted ADA Blow Out Type Flush Toilet
Requires the Premium User plan or above. (Login or upgrade your account!) -
7(2)(b)(iv)
In locations where toilets are adjacent to walls or bathtubs, the center line of the fixture is a minimum of 1'6" from the obstacle....
-
5.3.4 Grab Bars
Where walls or partitions are provided, grab bars complying with ABAAS section 604.5 shall be provided....
-
3. Protruding Objects
[ADA Stds. 4.4] Note: These objects may be wall mounted or free standing....
-
5.3.4 Grab Bars
Where walls or partitions are provided, grab bars complying with ABAAS section 604.5 shall be provided....
-
I. Required Survey Tools
following tools will be required to allow you to accurately complete the ADA Checklist for New Lodging Facilities: A. 12' Stiff Metal Tape Measure B. 24" Long Builders' Level (Square Edged Ends...
-
(1)(e)
(e) Doorways on the end of the enclosure, opposite the water closet, should have a minimum clear opening width of 32 inches (815 mm)....
-
804.2.1 Pass Through Kitchen
In pass through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing...
-
C. Interior Route from St. Francis Street Accessible Entrance to Main Hotel Lobby
Francis Street Accessible Entrance to Main Hotel Lobby: (1) Defendants will provide an accessible opening through the wall north of the glass wall which separates the pre-function room...
-
11B-809.10.6.4 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm) minimum...
-
11B-809.10.8.1 Location
Lavatories without base cabinets shall be installed with the centerline 18 inches (457 mm) minimum from an adjoining wall or fixture to allow for forward approach....
-
BlueDAG Software and Mobile Application
BlueDAG is a cloud-hosted software system for end-to-end management of ADA evaluation and compliance initiatives....
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 90-degree Turn
These data are based on measurements of wheeled mobility users performing 90-degree turns in a hallway, built with mock walls. The outside wall of the hallway was fixed....
-
Attachment E
The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach...
-
§ 37.131(a)(1)(i)
The corridor shall include an area with a three-fourths of a mile radius at the ends of each fixed route....
