In determining what is an appropriate grab bar, builders are encouraged to look to the 1986 ANSI A117.1 standard, the standard cited in the Fair Housing Act....
Search Results "Electroacoustic Performance Standards"
Filters
Commonly Searched Documents
-
24.1 Q. What types of grab bars should the reinforcement be designed to accommodate and what types may be used if the builder elects to install grab bars in some units at the time of construction?
-
§ 36.304(d)(2)(iii)
., elements for which there are neither technical nor scoping specifications in the 1991 Standards), and therefore those elements must be modified to the extent readily achievable to comply...
-
Alterations and Additions
This guide provides an introduction to the scoping requirements that form the basis for the Department of Justice’s 2010 ADA Standards and the Department of Transportation's ADA Standards...
-
11B-202.3.1 Prohibited reduction in access
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...
-
2.2.3 Functional Reach
Data can be presented in 3-D, in the form of 2-D charts along key planes (e.g. sagittal plane to represent forward reach abilities), or described for a standard reach (e.g. maximum forward...
-
Allegion Falcon MA Series Mechanical Locks
The Falcon MA Series lock delivers high performance at an affordable cost in your office, hospital, education or other commercial projects....
-
FOREWORD
Standards and policies are used to ensure and maximize the quality, objectivity, utility, and integrity of its information....
-
I. Executive Summary
in favor of expansive coverage, to the maximum extent permitted by the terms of the ADA; —that an impairment is a disability if it substantially limits the ability of an individual to perform...
-
E202.7 Best Meets
Where ICT conforming to one or more requirements in the Revised 508 Standards is not commercially available, the agency shall procure the ICT that best meets the Revised 508 Standards consistent...
-
M101.1 Purpose
The proposed standards contain technical criteria for medical diagnostic equipment that is accessible to and usable by patients with disabilities....
-
US Business Leadership Network (USBLN)
The US Business Leadership Network® (USBLN®) is a national non-profit that helps business drive performance by leveraging disability inclusion in the workplace, supply chain, and marketplace...
-
11B-904.4.1 Parallel approach
[2010 ADA Standards] 904.4.1 Parallel Approach....
-
11B-604.4 Seats
[2010 ADA Standards] 604.4 Seats....
-
11B-502.5 Vertical clearance
[2010 ADA Standards] 502.5 Vertical Clearance....
-
Section 36.406(e) Housing at a Place of Education
standards....
-
Section 35.151(f) Housing at a place of education
standards....
-
R105.3 Undefined Terms
The meaning of terms not specifically defined in R105.5, the referenced standards, or regulations issued by Federal agencies that adopt this document as accessibility standards shall be...
-
Height: ADA Standard Section 1005.2.1
1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building Code (2003 edition) (incorporated by reference, see “Referenced Standards...
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
-
11B-605.4 Flush controls
[2010 ADA Standards] 605.4 Flush Controls. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309....
-
11B-903.3 Size
[2010 ADA Standards] 903.3 Size. Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
LaCantina Folding Wood Door System
Available in a wide range of standard and custom wood species, ready to seal, stain or paint....
-
Kawneer North America 350/500 Heavy Wall™ Entrances
Performance To resist both lever arm and torsion forces that constantly act upon any door, the 350/500 Heavy Wall Entrance features four Sigma deep penetration and filet welds plus mechanical...
-
Section 1194.21 Software Applications and Operating Systems (Preamble, Section-by-Section Analysis)
For example, most of the menu functions in common drawing programs that allow a user to open, save, size, rotate, and perform other actions on a graphic image can all be performed from the...
