The element-by-element safe harbor referenced in Sec. 35.150(b)(2) has no effect on new or altered elements in existing facilities that were subject to the 1991 Standards or UFAS on the...
Search Results "Electroacoustic Performance Standards"
Filters
Commonly Searched Documents
-
Noncomplying new construction and alterations
-
F. Swimming Pool Entrance and Deck
Swimming Pool Entrance and Deck (1) Defendants will install a self-operated pool lift complying with 2010 ADA Standards §§ 242.2 and 1009.2 at the main swimming pool....
-
Noncomplying new construction and alterations. (Section-by-Section Analysis)
The element-by-element safe harbor referenced in Sec. 36.304(d)(2) has no effect on new or altered elements in existing facilities that were subject to the 1991 Standards on the date that...
-
Noncomplying new construction and alterations. (Section-by-Section Analysis)
The element-by-element safe harbor referenced in § 35.150(b)(2) has no effect on new or altered elements in existing facilities that were subject to the 1991 Standards or UFAS on the date...
-
11B-607.4 Grab bars
[2010 ADA Standards] 607.4 Grab Bars. Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2. Exceptions: 1. Reserved....
-
11B-405.2 Slope
[2010 ADA Standards] EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such...
-
Element-by-element safe harbor for public accommodations. (Section-by-Section Analysis)
The 2010 Standards introduce technical and scoping specifications for many elements that were not included in the 1991 Standards....
-
Platform Lifts in Transient Lodging Guest Rooms and Dwelling Units
The 1991 Standards, at section 4.1.3(5), exception 4, and the 2010 Standards, at sections 206.7 and 206.7.6, both limit the locations where platform lifts are permitted to be used as part...
-
202.3.1 Prohibited Reduction in Access
(c) If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the...
-
Where Required: Multi-Story Buildings and Facilities [§206.2.3]
However, if a building does qualify for an exception in the Standards: all other provisions in the Standards still apply to stories and mezzanines not served by an accessible route...
-
How is slip resistance measured?
Adding sand to the icy surface will increase its coefficient of friction and allow for a more standard gait....
-
4. My pool already existed before the effective date of the new rule. What am I required to do to provide pool access to customers with mobility disabilities?
The 2010 Standards provide the benchmark, or goal, for accessibility in existing pools. (See Question 2 for the 2010 Standards requirements for pools)....
-
201.1 Scope
This code establishes standards for accessibility to places of public accommodation and commercial facilities by individuals with disabilities....
-
B. Advisory Committee and Final Report (2006-2008)
In the years following our initial promulgation of the 508 Standards and 255 Guidelines, technology continued to evolve at a rapid pace....
-
5. Medical Diagnostic Equipment
On January 9, 2017, new accessibility standards were published in the Federal Register for medical diagnostic equipment....
-
702.3 Association for Information and Image Management (AIIM)
Copies of the referenced standard may be obtained from AIIM,1100 Wayne Ave., Ste. 1100, Silver Spring, Maryland 20910 (http://www.aiim.org/Resources/Standards/AIIM_ISO_14289-1)....
-
Accessible
The element or feature meets the minimum technical specifications under the 2010 Americans with Disabilities Act (ADA) Standards for Accessible Design and the Architectural Barriers Act...
-
§1193.51(b) Connection point for external audio processing devices
Products providing auditory output shall provide the auditory signal at a standard signal level through an industry standard connector....
-
LaCantina Aluminum Wood Door System
Folding windows Door & window combo Kitchen servery pass through Sizing and Configuration The Aluminum Wood bifold door system is available in a range of standard...
-
Q4.) Are conditions like door closers that require force in excess of the maximum allowed by the standards considered true tolerances or are they simply non-compliance with the maintenance requirements of 35.133 or 36.211?
A4.) In our opinion, the plain language of the term “Construction and Manufacturing Tolerances” does not include adjustable conditions that can meet the detailed requirements when...
-
Application to specific scenarios raised in comments. (Section-by-Section Analysis)
Business commenters requested guidance on whether the replacement for a broken or malfunctioning element that is covered by the 1991 Standards would have to comply with the 2010 Standards...
-
3.3.9 Toe Clearance Depth, minimum
3.3.9 Toe Clearance Depth, minimum Toe clearance depths for the standards range from 150 mm (6 in.) in the U.S. to 230 mm (9 in.) in Canada (Figure 3‒9)....
-
15(d)
subparagraph 15(a), HWI shall ensure that each Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel has the required number of accessible rooms with roll-in showers as set forth in ADA Standards...
-
Seton Directional Entrance Sign - Left Arrow
Use Accessible Entrance Signs to direct users to the nearest accessible entrance Engineer Grade reflective .063" aluminum material is equally visible day or night Extend the life and performance...
