[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
Search Results "Electroacoustic Performance Standards"
Commonly Searched Documents
-
11B-404.2.5 Thresholds
-
11B-605.4 Flush controls
[2010 ADA Standards] 605.4 Flush Controls. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309....
-
11B-903.3 Size
[2010 ADA Standards] 903.3 Size. Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
Section 1194.21 Software Applications and Operating Systems (Preamble, Section-by-Section Analysis)
For example, most of the menu functions in common drawing programs that allow a user to open, save, size, rotate, and perform other actions on a graphic image can all be performed from the...
- LaCantina Aluminum Wood Door System
-
5. Reassignment to a Vacant Position
An employer is not required to consider a different position for a job applicant if s/he is not able to perform the essential functions of the position s/he is applying for, with or without...
-
9. Is an employer required to provide the reasonable accommodation that the individual wants?
., it would remove a workplace barrier, thereby providing the individual with an equal opportunity to apply for a position, to perform the essential functions of a position, or to gain equal...
- Seton Directional Entrance Sign - Left Arrow
-
Section 4.26.4
• Section 4.26.4 of the 1991 Standards requires handrail gripping surfaces to have edges with a minimum radius of 1/8 inch....
-
§ 36.304(d)(2) Safe harbor
Elements in existing facilities that are not altered after [insert effective date of final rule], and that comply with the 1991 Standards, are not required to be modified in order to comply...
-
Barriers to People with Disabilities
Barriers to People with Disabilities - characteristics of spaces, elements, or services covered under the ADA Regulations or ADA Standards for New Construction that do not comply with those...
-
35. Nonacademic services
Section 104.47 establishes nondiscrimination standards for physical education and athletics counseling and placement services, and social organizations....
-
Bus boarding and alighting areas, BRT vehicles and stops/stations
ADA standards apply to buses and bus boarding and alighting areas as well as BRT vehicles and stops/stations. (DOT ADA Regulation 49 C.F.R....
- Panda S.11 Aluminum/Wood Clad Lift & Slide System
-
102 Dimensions for Adults and Children
102 Dimensions for Adults and Children Section 2.1 of the 1991 Standards stated that the specifications were based upon adult dimensions and anthropometrics....
-
406.1 General
Where data connections used for input and output are provided, at least one of each type of connection shall conform to industry standard non-proprietary formats....
-
2.1.1
In most cases, it is best to refer to industry standard tolerances or other industry documents when they exist....
-
16(a)(vii)
(vii) Any non-valet parking facilities owned or operated by the hotel have the number of accessible car and van-accessible parking spaces required by the ADA Standards and comply with the...
-
§ 35.151(c)(1)
construction or alterations commence after July 26, 1992, but prior to September 15, 2010, then new construction and alterations subject to this section must comply with either UFAS or the 1991 Standards...
-
Location of Accessible Routes
The 2010 Standards require all accessible routes to coincide with or be located in the same general area as general circulation paths....
-
Introduction
, employment tests or other selection criteria that screen out or tend to screen out an individual with a disability or a class of individuals with disabilities unless the standard, test...
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
Standards § 4.6.3. 2. Ramps....
-
a. Structural Strength
Industry must follow testing parameters found in other standards.”...
-
1. Rationale for Incorporation by Reference
They are as follows: First, our approach is consistent with that taken by other international standards organizations dealing with this issue....