Large, high contrast buttons are easy to press and see, and speak the numbers as they are dialed....
Search Results "High Speed Rail"
Commonly Searched Documents
- Clarity XLC2 Amplified Cordless Phone
-
M305.2.8 Fittings (Section-by-Section Analysis)
Further, this commenter noted that the requirement conflicts with proposed M302.2.3, which allows for temporary obstructions such as armrests, footrests, and side rails that can be repositioned...
-
11B-1002.4.3 Gaps
[2010 ADAS] Advisory 1002.4.3 Gaps Exception. 36 CFR 1192.83(c) ADA Accessibility Guidelines for Transportation Vehicles - Light Rail Vehicles and Systems - Mobility Aid Accessibility...
-
Door and Gate Hardware
glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed with locks that are activated only at the top or bottom rail...
-
1002.4.3 Gaps
Advisory 1002.4.3 Gaps Exception. 36 CFR 1192.83(c) ADA Accessibility Guidelines for Transportation Vehicles - Light Rail Vehicles and Systems - Mobility Aid Accessibility is available at...
-
1002.4.3 Gaps
Advisory 1002.4.3 Gaps Exception. 36 CFR 1192.83(c) ADA Accessibility Guidelines for Transportation Vehicles - Light Rail Vehicles and Systems - Mobility Aid Accessibility is available at...
-
11B-1002.4.3 Gaps
[2010 ADAS] Advisory 1002.4.3 Gaps Exception. 36 CFR 1192.83(c) ADA Accessibility Guidelines for Transportation Vehicles - Light Rail Vehicles and Systems - Mobility Aid Accessibility...
-
11B-1002.4.3 Gaps
Advisory 11B-1002.4.3 Gaps Exception. 36 CFR 1192.83(c) ADA Accessibility Guidelines for Transportation Vehicles - Light Rail Vehicles and Systems - Mobility Aid Accessibility is available...
- Alliance Laundry Systems Hardmount Washer Extractor Front Control Stainless Steel Cabinet
-
Jean Tessmer
One recommendation - show how high off the floor the ledge of the fully deployed baby changer shelf....
- Stanley Access Technologies Dura-Care 7000 Manual Door System
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Lavatories are subject to Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high...
-
SIGNALIZATION OF ROUNDABOUTS
That is, where entry flows are high, meters are used to create gaps downstream. Thus, metering facilitates entry of vehicles downstream of an entry that has a high flow....
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
Examples of "same decor" include, but are not limited to, seating at or near windows and railings with views, areas designed with a certain theme, party and banquet rooms, and rooms where...
-
M302.4.1 Clearance in Base
The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
M301.4.1 Clearance in Base
The base of diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured...
-
1015.3 Viewing Space
The viewing space shall be 32 inches (815 mm) maximum and 51 inches (1295 mm) minimum high above the ground and shall extend the full width of the clear ground space....
-
Verify Rough Plumbing
Both high and low 11B-602...
-
3.2 Physical Accessibility Barriers and Solutions
Barriers Solutions Simple/Low cost Involved / High cost Protruding Objects mounted on the wall (e.g., fire extinguisher) may endanger...
-
Verify Rough Plumbing
Both high and low 11B-602...
-
4.1.4(3) MILITARY HOUSING
either accessible or readily and easily modifiable to be accessible, but in any event, modification of individual units (including the making of adaptations), will be accomplished on a high...
-
Disability Employment Initiative
A graduate of East Peoria High School in Illinois who has a developmental disability participates in job training. — Life Academy...
-
Engineered vs. Outside
The high R2 values for the engineered surfaces show that vibrations for a particular surface can be predicted by knowing the surfaces roughness....