The visible signal elements shall be a minimum 2½ inches (64 mm) high by 2½ inches (64 mm) wide. Signals shall be visible from the floor area adjacent to the hall call button. ...
Search Results "High Speed Rail"
Commonly Searched Documents
-
11B-407.2.2.2 Visible signals
- American Specialties Turbo-Tuff™ Recessed Mounted Hand Dryer 0134
-
d. Unobstructed Transfer
As explained in the MDE NPRM preamble, the unobstructed access requirement was to ensure that armrests, side rails, stirrups, or other equipment parts attached to the diagnostic equipment...
-
11B-502.6.4.1
The parking space shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 in white on a blue background a minimum 36 inches wide by 36 inches high...
-
E. Beds in nursing homes and other care facilities
Beds in nursing homes and other care facilities Nursing homes, assisted living facilities, and other care facilities may have beds that are too high or too low, which can be a problem...
-
4.15.3 Spout Location
The spout shall provide a flow of water at least 4 in (100 mm) high so as to allow the insertion of a cup or glass under the flow of water....
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
11B-502.6.4.1
The parking space shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 in white on a blue background a minimum 36 inches wide by 36 inches high...
-
References
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical. 303.3 Beveled....
-
Ramps M303:3.3, 3.3.1, 3.3.2
Level changes up to ¼ inch high are permitted to be vertical. Level changes between ¼ inch high and ½ inch high would be required to be beveled with a slope not steeper than 1:2....
-
A) Accessible Parking
These parking spaces must be located on level ground and identified with a sign mounted in front of the parking space high enough so it is visible when a vehicle is parked....
-
3.1 Key Findings
An exception to this was the high contrast black-and-white patterned detectable warnings which were generally detectable and conspicuous across all four sidewalk types....
- Sunlighten Community Solocarbon® Far Infrared Sauna
- Aurora Doors Sliding Barn Door
- BEA Inc. Jamb Style Door Access PTE (Push To Exit)
-
Purpose of the Workshop
Create high-definition environments for people with visual impairment So we look to put together some concepts for creating a more high-definition environment for people who are visually...
-
4.3 Locker Room Barriers and Solutions
Barriers Solutions Easy/Low cost Involved / High cost Not enough space in front of the lockers Ask staff to permanently assign you a...
-
Temporary Solutions for Election Day: Accessible Entrance to Polling Place
Suggestion: If the threshold is not more than 3/4 inches high, add beveled surfaces to both sides of the threshold or replace with a new threshold that is no more than 1/2 inch high and...
-
Data acquisition
The vertical z-axis was chosen because it is parallel to the spine and lower legs of the subject, both of which are high-risk areas for negative health outcomes....
-
Common Problems with Entrances and Doors
Ø The door threshold is more than ½ inch high, preventing some people who use wheelchairs from entering....
-
11B-407.2.2.2 Visible signals
The visible signal elements shall be a minimum 2½ inches (64 mm) high by 2½ inches (64 mm) wide. Signals shall be visible from the floor area adjacent to the hall call button....
-
M302.4.2 Clearance Around Base
The base of the diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination...
-
M301.4.2 Clearance Around Base
The base of diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination...