receptacle outlets, appliances or cooling, heating and ventilating equipment, shall comply with Section 11B-308 except the low reach shall be measured to the bottom of the outlet box and the high...
Search Results "High Speed Rail"
-
11B-308.1.1 Electrical switches
-
11B-308.1.1 Electrical switches
receptacle outlets, appliances or cooling, heating and ventilating equipment, shall comply with Section 11B-308 except the low reach shall be measured to the bottom of the outlet box and the high...
-
Door King Inc. 6004 Column Mount Swing Gate Operator
The 6004 Column Mount operates on 24 Volt DC power and features built in limit switches that precisely control the start / stop speed, and travel of your gate....
-
Tobii Technology PCEye Go
The Tobii PCEye Go is a peripheral eye tracker that enhances computer accessibility with the speed, power and accuracy of gaze interaction....
-
Section F: Voting Area
(§302.1) F2 Is the route free of wall mounted objects that protrude more than 4" into the path of travel and are between 27" and 80" high?...
-
11B-306.3.3 Minimum required depth
At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth of 8 inches (203 mm...
-
602.6 Water Flow
The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit....
-
Play Tables
Where play tables are located on an accessible route, the wheelchair knee clearance minimums are: 24 inches (610 mm) high minimum 30 inches (760 mm) wide minimum...
-
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms
Changes in level greater than ½ inch high shall be ramped and shall comply with M303.3.3. M303.3.3.1 Running Slope. Ramp runs shall have a running slope no steeper than 1:12....
-
C. Examples of Recipients Covered by These Guidelines
The administrative board of a specialized vocational high school serving students from more than one school district. 3....
-
11B-602.6 Water flow
The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit....
-
11B-602.6 Water flow
The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit....
-
11B-306.3.3 Minimum required depth
Exceptions: At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-306.3.3 Minimum required depth
Exceptions: At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-602.6 Water flow
The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit....
-
602.6 Water Flow
The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit....
-
11B-502.7.1 Arrangement
Wheelchair users traveling behind parked vehicles may be obscured from the view of drivers backing out of parking spaces, especially when passing behind high-profile vehicles....
-
11B-502.7.1 Arrangement
Wheelchair users traveling behind parked vehicles may be obscured from the view of drivers backing out of parking spaces, especially when passing behind high-profile vehicles....
-
Horton ProSlide™-Blast Sliding Door System
duration during design loading for blast resistant glazing fabricated with laminated glass Be prepared with the following ProSlide™-Blast Series benefits: Steel reinforced header and rails...
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
-
2. Door Hardware
bathroom door hardware (levers, pulls, etc.) easily operable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have high...
-
11B-809.7.2 Changes in level
complying with Section 11B-405, elevators complying with Section 11B-407 or platform lifts complying with Section 11B-410 shall be provided where changes in level exceed 1/2 inch (12.7 mm) high...
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
