This will allow persons using a wheelchair to turn around and access the wall, depending on the side they can best use to transfer....
Search Results "Latch Side Clearance"
Commonly Searched Documents
-
Clear Deck Space
-
Water Closet Clear Floor Space in Toilet Compartments
Other criteria for toilet rooms, including turning space, maneuvering space at doors, and clearances at other fixtures, typically results in additional clearance at water closets not in...
-
Grab Bars
If only one bar is provided, the clearance must be a minimum of 24 inches on each side of the bar....
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
- Rockwood Manufacturing Company 596S Hospital Push Pull Latch 2-3/4" Backset
- Accessible Parking Video Fact Sheet
-
What is an accessibility evaluation survey and when is one needed?
The measuring tape is stretched from the face of the door to the nearest portion of the doorframe or latch mechanism on the latch side....
-
11B-1009.4.5 Grab bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
11B-1009.4.5 Grab bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
M302.4 Lift Compatibility (Section-by-Section Analysis)
M302.4.1) or clearance around base (proposed M302.4.2) technical requirements....
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
Effective Date: April 1, 2017 2012 TAS Reference: 404.2.10ย 404.2.10 requires door and gate surfaces within 10 inches (255mm) of the finish floor to have a smooth surface on the push side...
-
Toilet Room Doors
Concerns were raised that permitting doors of single-user toilet or bathing rooms with in-swinging doors to swing into the clearance around any fixture will result in inaccessibility to...
-
Gates and Barriers
In such circumstances, 32 inches (815 millimeters) clearance, the same as is required for an interior door, will provide pedestrian access to the recreation opportunity without permitting...
-
Mounting Height and Location
Tactile signs are required to be located alongside the latch side of doors so that clear floor space at least 18 by 18 inches, centered on the tactile characters, is provided outside the...
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
- AJW Architectural Products U719 96"W x 48"H J-Mold Mirror - Four Sided Frame - Plate Glass
-
11B-608.2.1 Transfer type shower compartments
Transfer type shower compartments shall be 36 inches (914 mm) by 36 inches (914 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (914...
-
Storage [9.2.2(4)]
Clear floor space for either a forward or side approach is allowed....
-
Clear Floor Space [ยง309.2]
If clear floor space is obstructed on both sides more than half the minimum required depth, a wider clearance (36โ min.) is required for maneuvering and sway....
- Figure 1003.3.1 Boat Slip Clearance โ Drawing from the U.S. Access Board
- Figure 1003.3.2 Boarding Pier Clearance โ Drawing from the U.S. Access Board
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....