They must be free of level changes and not slope more than 1:48. The minimum size (30” by 48”) applies whether the space is positioned for forward or side approaches....
Search Results "Counter Slope"
Filters
Commonly Searched Documents
-
Surface and Size [§305.2 and §305.3]
-
What is slip resistance?
Materials which might be suitable for level surfaces may be inappropriate for sloping surfaces; materials specified for dry conditions may be unsafe when it rains; a leather shoe may perform...
-
Tent Pads and Tent Platforms
Do not allow the slope of an accessible tent pad or platform to exceed 1:48 (2 percent) in any direction, except when the surface isn't paved or built with boards, the slope may be up to...
-
2. Follow the Accessibility Standards for Play Areas
• The running slope not steeper than 1:16 or 6.25%. • The cross slope shall not be steeper than 1:48 or 2.08%....
-
Beneficial Designs The Universal Trail Assessment Process (UTAP)
Suunto clinometer to measure the average grade between two points of the trail; a digital SmartTool inclinometer to measure trail sections for maximum grade and maximum and average cross slope...
-
Fixed position maps and kiosks
These kiosks include translucent acrylic touch-sensitive maps placed on top of LCD flat panel displays on sloping counters (fig. 7)....
-
Weizel Security 826-S74 SR™ Partition Door
The sloping door top sheds items which could otherwise be slung over it....
-
Corbin Russwin Inc. BLSS Trim Lever Handle & Lockset
Sloping surfaces and overlapping rose and lever address safety concerns common in behavioral health facilities....
-
AJW Architectural Products U591 1.6 Gallon Sanitary Napkin Disposal - Surface Mounted
Cover: Fabricated of #22 ga stainless steel #4 satin finish with embossed handles on each side and sloped top. Hinge: Heavy duty, full length, stainless steel piano type hinge....
-
Islands: ADA Standard Section 406.7
Section 406.7 covers the current ADA Standards for islands.
-
11B-406.6 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
11B-805.7 Built-in cabinets and work surfaces
Built-in cabinets, counters and work surfaces shall be accessible, including: patient wardrobes, nurse’s stations, administrative centers, reception desks, medicine preparation areas, laboratory...
-
11B-1005.1 Accessible routes
length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section 11B-405.2 _|Slope...
-
Gangways
Gangways A gangway is a variable-sloped pedestrian walkway linking a fixed structure or land with a floating structure....
-
1009.4.1 Clear Deck Space
A clear deck space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
-
§ 36.304(d)(3)
Such measures include, for example, providing a ramp with a steeper slope or widening a doorway to a narrower width than that mandated by the alterations requirements....
-
Verify Rough Plumbing
drain. 11B-607.5 Installation height and location of shower controls. 11B-608.5 Location of shower drains and floor slope...
-
R304.2.3 Flared Sides
Where a pedestrian circulation path crosses the curb ramp, flared sides shall be sloped 10 percent maximum, measured parallel to the curb line. Advisory R304.2.3 Flared Sides....
-
Thresholds at Doorways [4.13.8]
Thresholds above ¼ inch must be beveled with a slope no greater than 1:2....
-
Verify Rough Plumbing
drain. 11B-607.5 Installation height and location of shower controls. 11B-608.5 Location of shower drains and floor slope...
-
2) Where the Standard says "Changes in level are not permitted"
such as 304.2 for turning spaces: Here the standard is followed by an unenforceable advisory that says, "As used in this section, the phrase ‘changes in level’ refers to surfaces with slopes...
-
4.33.3* PLACEMENT OF WHEELCHAIR LOCATIONS
EXCEPTION: Accessible viewing positions may be clustered for bleachers, balconies, and other areas having sight lines that require slopes of greater than 5 percent....
-
Is there a minimum distance between changes in level?
used to span vertical changes greater than ½”, must have level landings and clearances at the tops and bottoms of each run to provide adequate separation and resting intervals between sloping...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2....
