ASTM E 950-98(2004) Standard test method for measuring the longitudinal profile of traveled surfaces with an accelerometer established inertial profiling...
Search Results "Floor Identification"
Filters
Commonly Searched Documents
-
Highway standards suggesting possible applications for pedestrian surfaces
-
11B-803.3 Door swing
Doors shall not swing into the room unless a turning space complying with Section 11B-305.3 is provided beyond the arc of the door swing.
-
§ 38.95(b)(6) Platform surface
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant. The lift platform shall have a minimum clear width of...
-
11B-803.3 Door swing
Doors shall not swing into the room unless a turning space complying with Section 11B-304.3 is provided beyond the arc of the door swing.
-
11B-809.5.5.2 Identification
[2010 ADAS] Advisory 809.5.5.2 Identification. ...
-
11B-809.5.5.2 Identification
[2010 ADAS] Advisory 809.5.5.2 Identification....
-
11B-809.5.5.2 Identification
Advisory 11B-809.5.5.2 Identification....
-
American Standard Acrylic Shroud for American Standard Selectronic Faucets
Fits American Standard Murro™ wall hung lavatories Durable Acrylic material with aesthetically pleasing design Designed to conceal Selectronic control box,...
-
Access Board: Accessible Route Carpet
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided...
-
Bathroom Do’s and Dont’s
Use a floor drain that extends the length of the shower to prevent water flowing into other areas of the bathroom....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
access to multifamily dwelling units, in a single building with one common (lobby) entrance, located on a site with difficult terrain conditions or unusual characteristics: All ground floor...
-
Plan 3B: 12-Foot Wide Accessible Guest Room
Standard roll-in type shower with folding seat (section 608.2.2); • Recessed lavatory with vanity counter top permits shorter rear grab bar at water closet (section 604.5.2); • Clear floor...
-
Plan 2A: 13-Foot Wide Accessible Guest Room
• Standard roll-in type shower with folding seat (section 608.2.2); • Recessed roll-in shower location permits shorter rear grab bar at water closet (section 604.5.2); • Clear floor...
-
Alterations and Water Closet Clearances in Single-User Toilet Rooms With In-Swinging Doors (Section-by-Section Analysis)
The 1991 Standards do not allow an in-swinging door in a toilet or bathing room to overlap the required clear floor space at any accessible fixture....
-
703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided...
-
703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided...
-
T704.3.2 Automated Route Identification Announcements
Automated route identification systems shall audibly and visibly identify the fixed route on which the non-rail vehicle is operating....
-
Arriving at the Polling Place: Parking
If parking is provided for voters, accessible parking must be provided for people with disabilities. An accessible space is composed of three elements: the parking space, an access...
-
PART 3: ACCESSIBLE EXAMINATION ROOMS
.); and adequate clear floor space inside the room for side transfers and use of lift equipment....
-
Plan 6B: 12-Foot Wide Accessible Guest Room
• Recessed lavatory with vanity counter top permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear floor...
