The standards requiring sufficient space in single-user toilet rooms for a wheelchair user to effect a side or parallel transfer are among the most costly (in monetary terms) of the...
Search Results "Floor Identification"
Filters
Commonly Searched Documents
-
Additional benefits of water closet clearance standards
-
11B-231.1 General
Judicial facilities shall comply with Section 11B-231.
-
231.1 General
231.1 General. Judicial facilities shall comply with 231. Notwithstanding the requirements of this section, section 201.1.1 shall apply.
-
Front Entry
Water fountain for the relaxing sound of running water to reduce stress Video intercom which shows images of the visitor throughout the house and records visitor while...
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception. Where a condition for...
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant.
-
Is there a minimum distance between changes in level?
The standards do not require a minimum horizontal separation between changes in level of a ½” or less. Such level changes may need to be in close proximity, such as at raised...
-
11B-231 Judicial facilities.
[See subsections ...]
-
Additional benefits of water closet clearance standards
The standards requiring sufficient space in single-user toilet rooms for a wheelchair user to effect a side or parallel transfer are among the most costly (in monetary terms) of the...
-
§ 38.159(b)(6) Platform surface
(6) Platform surface. The platform surface shall be free of any protrusions of 1/4 inch (6.5 mm) high and shall be slip resistant. The platform shall have a minimum clear width of 28...
-
§ 38.83(b)(6) Platform surface
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant. The lift platform shall have a minimum clear width of...
-
11B-231.1 General
Judicial facilities shall comply with Section 11B-231.
-
11B-231.1 General
Judicial facilities shall comply with Section 11B-231.
-
11B-231 Judicial facilities
[See subsections ...]
-
809.5.5.2 Identification
Advisory 809.5.5.2 Identification....
-
809.5.5.2 Identification
Advisory 809.5.5.2 Identification....
-
Where must the wheelchair symbol be posted?
Rest rooms The ISA and gender designation must be posted at all accessible rest rooms on the wall beside the latch side of the door, 60 inches above the floor....
-
(1)(a)
(a) The minimum clear floor area should be 35 inches (890 mm) by 60 inches (1525 mm)....
-
1007.3.2 Golf Club Reach Range Area
All areas within holes where golf balls rest shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum...
-
11B-1007.3.2 Golf club reach range area
All areas within holes where golf balls rest shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum...
-
11B-1007.3.2 Golf club reach range area
All areas within holes where golf balls rest shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum...
-
Inpro Corporation JointMaster® AR Series Seal Expansion Joint Systems
The AR series compression seal is heat weldable for watertight seams. Features & Benefits: Heavy pedestrian / moderate vehicular loading...
-
Behavioral Safety Products #TC230 Suicide Resistant Standard Trap Cover
This suicide resistant trap cover is designed to cover plumbing under most conventional wall mounted sinks to prevent access to the plumbing. This unit provides ADA compliant...
-
McGuire Manufacturing Co., Inc. 155CRSWC: Offset Lavatory Strainer with Chain and Rubber Stopper
Offset strainer with chain and rubber stopper. Furnished with heavy brass elbow and 17GA seamless brass offset tailpiece. 8 3/4" x 5 1/8" OD.
