Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 11B-302. Exceptions: 1. ...
Search Results "Floor Identification"
Commonly Searched Documents
-
11B-302.1 General
-
11B-302.1 General
Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 11B-302. Exceptions: 1. ...
-
11B-302.1 General
Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 11B-302....
- Image Identification Project
-
11B-802.4.2 Identification
[2010 ADAS] 802.4.2 Identification. Each designated aisle seat shall be identified by a sign or marker. [2010 ADAS] Advisory 802.4.2 Identification. ...
-
11B-802.4.2 Identification
[2010 ADAS] 802.4.2 Identification. Each designated aisle seat shall be identified by a sign or marker. [2010 ADAS] Advisory 802.4.2 Identification....
-
11B-802.4.2 Identification
[2010 ADA Standards] 802.4.2 Identification. Each designated aisle seat shall be identified by a sign or marker. Advisory 11B-802.4.2 Identification....
-
1007.3.2 Golf Club Reach Range Area
All areas within holes where golf balls rest shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum...
-
11B-407.2.3.2 Reserved
ETA Editor's Note Imposing additional requirements regarding characters and colors, the preceding CBC requirements pertaining to elevator hoistway signs are more stringent...
-
11B-1007.3.2 Golf club reach range area
All areas within holes where golf balls rest shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum...
-
Accessible Parking
Accessible Parking When parking is provided for the public, designated accessible parking spaces must be provided, if doing so is readily achievable. An accessible parking space...
-
1007.3.2 Golf Club Reach Range Area
All areas within holes where golf balls rest shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum...
-
4.32.2 Seating
If seating spaces for people in wheelchairs are provided at fixed tables or counters, clear floor space complying with 4.2.4 shall be provided....
-
4.32.2 SEATING
If seating spaces for people in wheelchairs are provided at tables, counters, or work surfaces, clear floor space complying with 4.2.4 shall be provided....
-
4.7.5 Openings
Openings in surface of the clear floor or ground spaces required by section 2.0 shall not allow passage of a sphere more than 1/2 inch (13 mm) in diameter....
- Inclusion Solutions Van Accessible Voter Parking Sign
-
216.9.1 Identification Signs
216.9.1 Identification Signs. Public TTYs shall be identified by the International Symbol of TTY complying with 703.7.2.2....
-
Forward Approach
Faucets, controls, and dispensers should be within the usable clear floor space to be within easy reach....
-
11B-233.3.1.2.6.5 Additional requirements.
1. Grab bar reinforcement complying with Sections 11B-809.10.5.2, 11B-809.10.6.4, or 11B-809.10.7.3. 2. Interior door opening width complying with Section 11B-404.3.1. 3....
-
11B-503.6 Identification
Identification Removes requirements for ISA sign at passenger loading zones....
-
12.2 Q. What happens if a builder deliberately manipulates the grade so that a second story, which also might have been treated as a ground floor, requires steps?
Deliberate manipulation of the height of the finished floor level to avoid the requirements of the Fair Housing Act would serve as a basis for the Department to determine that there is reasonable...
-
4.1.3 Wheelchair Seating Space
Clear floor or ground space that is at least 30 inches by 48 inches shall be provided at each seating space that is required to be accessible and positioned for a forward approach to the...
-
216 Signs
Exception is new. 4.3.11.5 Identification....