The maximum nominal load, 200 kg (440 lbs), 250 kg (550 lbs), 300 kg (660 lbs), 350 kg (770 lbs), 375 kg (825 lbs) respectively, must not be exceeded....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
Guldmann GH3 Lifting Module
-
BEST Keypad EZ Door Hardware
Local factory-trained technical services are available 24 hours a day to meet any emergency need. Replacement parts available....
-
Dune Crossings [1018.10]
The technical requirements for dune crossings do not address the vertical pickets provided in some handrail designs....
-
5.4.1.2 Transfer and Positioning Support Location Recommendations for Imaging Equipment with Transfer Surfaces
The Committee used a 24-inch dividing point for table width to accommodate the dimensions for the maximum reach range....
-
Teeing Grounds: ADA Standard Section 238.2.1
Section 238.2.1 covers scoping requirements in the current ADA Standards for teeing grounds.
-
11B-238.2.1 Teeing grounds
forward teeing ground shall not be required to be one of the teeing grounds on a hole designed and constructed so that a golf car can enter and exit the teeing ground where compliance is not feasible...
-
11B-238.2.1 Teeing grounds
forward teeing ground shall not be required to be one of the teeing grounds on a hole designed and constructed so that a golf car can enter and exit the teeing ground where compliance is not feasible...
-
2.1 General
The routes connecting those facilities are to comply with the technical provisions for trails. Exception 2....
-
Destination-Oriented Elevators
Responding cars are programmed for maximum efficiency by reducing the number of stops any passenger experiences....
-
Accessible Parking Video Fact Sheet
Technical assistance for these standards is available by calling 1-800-949-4232....
-
5.2.1.4 Transfer Surface Size Recommendations for Imaging Equipment (M301)
Where the 28 inches minimum depth is technically infeasible, the depth may be no less than 21 inches....
-
Stairs and Escalators in Existing Buildings: ADA Standard Section 206.2.3.1
Section 206.2.3.1 covers the scoping requirements for accessible routes between stairs and escalators in existing buildings.
-
R302.5 Grade
Where pedestrian access routes are not contained within a street or highway right-of-way, the grade of pedestrian access routes shall be 5 percent maximum. Advisory R302.5 Grade....
-
Ramp
For example, some amusement park rides have sloped surfaces built into the structure of the ride vehicle to help individuals transfer into and out of the vehicle. ...
-
Passing Spaces on Trails
clear tread width of a trail is less than 60 inches (1,525 millimeters), provide passing spaces at least every 1,000 feet (300 meters) and at the end of any segment of trail that meets the technical...
-
§1607.6 Use of selection procedures which have not been validated.
When a formal and scored selection procedure is used which has an adverse impact, the validation techniques contemplated by these guidelines usually should be followed if technically feasible...
-
Overview
In developing its proposals, the subcommittee considered the physical constraints needed for operation of the equipment, technical feasibility, patient safety, and clinical standards....
-
USE ZONE
[DSA-AC] The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 for unrestricted circulation around the play equipment...
-
1.9.1.1.3
1.9.1.1.3 All existing publicly funded buildings and facilities when alterations, structural repairs or additions are made to such buildings or facilities....
-
USE ZONE
[DSA-AC] The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 for unrestricted circulation around the play equipment...
-
1.9.1.1.3
1.9.1.1.3 All existing publicly funded buildings and facilities when alterations, structural repairs or additions are made to such buildings or facilities....
-
Location and Size
• The gripping surface of the transfer support would be located 1½ inches maximum measured horizontally from the adjacent edge of the transfer surface....
-
Non-compliant bathtub seat depth
The depth of the seat exceeds the 16" maximum at a depth of 21" (2010 ADA Standards section 610.2). ...
