forward teeing ground shall not be required to be one of the teeing grounds on a hole designed and constructed so that a golf car can enter and exit the teeing ground where compliance is not feasible...
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
11B-238.2.1 Teeing grounds
-
11B-238.2.1 Teeing grounds
forward teeing ground shall not be required to be one of the teeing grounds on a hole designed and constructed so that a golf car can enter and exit the teeing ground where compliance is not feasible...
-
5.2.1.4 Transfer Surface Size Recommendations for Imaging Equipment (M301)
Where the 28 inches minimum depth is technically infeasible, the depth may be no less than 21 inches....
-
R302.5 Grade
Where pedestrian access routes are not contained within a street or highway right-of-way, the grade of pedestrian access routes shall be 5 percent maximum. Advisory R302.5 Grade....
-
Ramp
For example, some amusement park rides have sloped surfaces built into the structure of the ride vehicle to help individuals transfer into and out of the vehicle. ...
-
ELEVATED PLAY COMPONENT
[DSA-AC] A play component that is approached above or below grade and that is part of a composite play structure consisting of two or more play components attached or functionally linked...
-
ELEVATED PLAY COMPONENT
[DSA-AC] A play component that is approached above or below grade and that is part of a composite play structure consisting of two or more play components attached or functionally linked...
-
Disability Services & Legal Center - Santa Rosa, Napa, Ukiah, CA
Our Philosophy We believe People with Disabilities, to the maximum extent possible, as an inherent civil right, should direct their own lives and make their own decisions as to what...
-
Destination-Oriented Elevators
Responding cars are programmed for maximum efficiency by reducing the number of stops any passenger experiences....
-
2.1 General
The routes connecting those facilities are to comply with the technical provisions for trails. Exception 2....
-
Overview
In developing its proposals, the subcommittee considered the physical constraints needed for operation of the equipment, technical feasibility, patient safety, and clinical standards....
-
§1607.6 Use of selection procedures which have not been validated.
When a formal and scored selection procedure is used which has an adverse impact, the validation techniques contemplated by these guidelines usually should be followed if technically feasible...
-
Guardian Barrier-Free WideArea™ Eye/Face Wash GBF1724
Profile of unit is “flattened” to comply with maximum height and knee clearance requirements....
-
Obstructed High Reach: ADA Standard Section 308.2.2
Section 308.2.2 covers the current ADA Standards for obstructed high reach.
-
11B-308.2.2 Obstructed high reach
The high forward reach shall be 48 inches (1219 mm) maximum where the reach depth is 20 inches (508 mm) maximum....
-
11B-308.2.2 Obstructed high reach
The high forward reach shall be 48 inches (1219 mm) maximum where the reach depth is 20 inches (508 mm) maximum....
-
Passing Spaces on Trails
clear tread width of a trail is less than 60 inches (1,525 millimeters), provide passing spaces at least every 1,000 feet (300 meters) and at the end of any segment of trail that meets the technical...
-
Stairs and Escalators in Existing Buildings: ADA Standard Section 206.2.3.1
Section 206.2.3.1 covers the scoping requirements for accessible routes between stairs and escalators in existing buildings.
-
Accessible Parking Video Fact Sheet
Technical assistance for these standards is available by calling 1-800-949-4232....
-
1. Movable aisle armrests
Such armrests need not be provided on emergency exit row seats or on seats on which movable aisle armrests are not feasible....
-
Rectangular Seats: ADA Standard Section 610.3.1
Section 610.3.1 covers the current ADA Standards for rectangular shower compartment seats.
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
Location and Size
• The gripping surface of the transfer support would be located 1½ inches maximum measured horizontally from the adjacent edge of the transfer surface....
