Curved ramps are not prohibited by Chapter 11B; however, requirements for maximum slope and cross-slope cannot be exceeded. ◼...
Search Results "Expected Maximum Flight Duration"
-
11B-405.3 Cross slope
-
11B-809.1.2 Viewing devices
standing person, the primary entry door to a residential dwelling units with mobility features shall also provide a lower viewing device 42 inches (1067 mm) minimum and 43 inches (1092 mm) maximum...
-
11B-1008.2.5.2 Elevated
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
-
Discrimination is Prohibited
[Sec. 382.7(a)(4)] Carriers cannot limit the number of passengers with a disability on a given flight....
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADAS] 703.5.7 Stroke Thickness. ...
-
505.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6 1/4 inches (160 mm) maximum, and a cross-section dimension...
-
407.12.3.1 Unobstructed Forward Reach
Where the operable part is located at the leading edge of the maximum protrusion within the length of the vertical reference plane of the ICT, the operable part shall be 48 inches (1220...
-
505.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6 1/4 inches (160 mm) maximum, and a cross-section dimension...
-
Door and Gate Hardware: ADA Standard Section 404.2.7
Section 404.2.7 covers the current ADA Standards for door and gate hardware.
-
What do I do if I believe that a passenger’s assertions about having a disability or a service animal are not credible?
In the rare instance that a service animal would raise a concern regarding flight safety, the CRO may consult with the pilot-in-command....
-
3. Stowage Space for Wheelchairs
comments pointed out, requiring space for one wheelchair does not completely solve this problem for all passengers with disabilities, doing so does help at least one such passenger per flight...
-
2. Accessible lavatories
Particularly given that single-aisle aircraft often make lengthy flights (e.g., across North America, some trans-oceanic flights), it is clear that providing accessible lavatories on single-aisle...
-
382.9 What may foreign carriers do if they believe a provision of a foreign nation’s law prohibits compliance with a provision of this Part?
This may occur, for example, in the case of U.S. carriers who must ensure compliance with the service-related provisions of this Part on code share flights between two foreign points operated...
-
Section 36.406(c) Places of Lodging (Section-by-Section Analysis)
Is it the total number of units in the facility, or some smaller number, such as the number of units participating in the rental program, or the number of units expected to be available...
-
Section 37.173 Training
in addition to providing useful information, should help to establish or improve working relationships among transit providers and disability groups that, necessarily, will be of long duration...
-
M303.2.4.1.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum from the toe end of the wheelchair space....
-
11B-804.3.2 Height
The kitchen work surface shall be 34 inches (864 mm) maximum above the finish floor or ground....
-
804.3.2 Height
The kitchen work surface shall be 34 inches (865 mm) maximum above the finish floor or ground....
-
11B-804.3.2 Height
The kitchen work surface shall be 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-609.2.2 Non-circular cross section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (102 mm) minimum and 4.8 inches (122 mm)...
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADA Standards] 703.5.7 Stroke Thickness....
-
11B-804.3.2 Height
The kitchen work surface shall be 34 inches (864 mm) maximum above the finish floor or ground....
-
Impact Annenuation [sic]
G 56 83 60 87 312 313 324 318 H 65 103 69 101 325 493 406 472 The specification calls for a maximum...
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....