Changes in level greater than ½ inch (12.7 mm) shall be made by means of a sloped surface not greater than 1 unit vertical in 20 units horizontal (5-percent slope), or a ramp, elevator or...
Search Results "Counter Slope"
-
1131A.2 Changes greater than ½ inch
-
1131A.1 Changes in level not exceeding ½ inch
When changes in level do occur, they shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)....
-
Beveled: ADA Standard Section 303.3
Section 303.3 covers the current ADA Standards for beveled level changes.
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
505.1 General
Handrails are not required on walking surfaces with running slopes less than 1:20....
-
Rise
The maximum length of a run is determined by the rise (30 inches maximum) and the slope: Max. Rise Slope Max. Length Max. Rise Slope Max....
-
1017.10 Trailhead Signs
requires trail information signs at trailheads to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and maximum running slope...
-
11B-411.2.1.3.4 Position
The face of individual elements or group of individual elements that are operated by user input shall slope away from the user at 15 to 25 degrees from the vertical plane. ...
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
Transits and construction lasers
Transits and construction lasers are useful for setting or measuring overall elevation points to determine a total slope....
-
Original research for ANSI A117.1 (1957 - 1961)
Both slope and cross slope were measured. These guidelines for measurement were deleted from later versions of the standard....
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
-
Wading pools. (Section-by-Section Analysis)
Section 242.3 of the 2004 ADAAG provides that newly constructed or altered wading pools must provide at least one sloped means of entry to the deepest part of the pool. ...
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
§382.57(d)
automated kiosk, assisting a passenger who due to his or her disability cannot use an accessible automated kiosk by allowing the passenger to come to the front of the line at the check-in counter...
-
§ 382.57(d)
automated kiosk, assisting a passenger who due to his or her disability cannot use an accessible automated kiosk by allowing the passenger to come to the front of the line at the check-in counter...
-
Kitchen Work Surfaces
One commenter stated that "Element 12" in the chart accompanying the Guidelines for Requirement 2 (public and common use areas) seems to require a portion of the kitchen counters to be accessible...
-
Expert Report of James L.E. Terry, Evan Terry Associates, LLC (August 9, 2018)
Drop-off: The surface slope in the vehicle pull-up space is not level in all directions and exceeds the maximum slope allowed of 1:48 (1991 ADA Stds 4.6.6; ADA Stds 503.4)....
-
General Tips
If service counters are too high for some users, such as people of short stature and people using wheelchairs, step around counters to provide service....
-
Start of Play Areas
It must have a slope no steeper than 1:48 so that people using wheelchairs or mobility devices do not have to hit the ball while positioned on a sloped surface....
-
Changes in Level [§303]
Changes in Level [§303] Changes in level can be up to ¼” without treatment or ½” if beveled with a slope no steeper than 1:2....
-
11B-505.1 General
Handrails are not required on walking surfaces with running slopes less than 1:20....