At some point, it is possible that manufacturers may voluntarily label products based on industry developed measures to enable end users to more easily identify how a product meets the applicable...
Search Results "Mitigating Measures"
Filters
Commonly Searched Documents
-
E.6.i. - Will there be a web site providing information on how manufacturers have addressed the Access Board’s technical provisions?
-
604.3.2 Overlap
complying with 606 shall be permitted on the rear wall 18 inches (455 mm) minimum from the water closet centerline where the clearance at the water closet is 66 inches (1675 mm) minimum measured...
-
11B-505.4 Height
A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children....
-
Undue burden
action; the number of persons employed at the site; the effect on expenses and resources; legitimate safety requirements that are necessary for safe operation, including crime prevention measures...
-
Readily achievable
action; the number of persons employed at the site; the effect on expenses and resources; legitimate safety requirements that are necessary for safe operation, including crime prevention measures...
-
Undue burden
action; the number of persons employed at the site; the effect on expenses and resources; legitimate safety requirements that are necessary for safe operation, including crime prevention measures...
-
Clear Floor Space [4.2.4]
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support....
-
308.3.2 Obstructed High Reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
308.3.2 Obstructed High Reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
Miniature Horses
(Miniature horses generally range in height from 24 inches to 34 inches measured to the shoulders and generally weigh between 70 and 100 pounds.)...
-
READILY ACHIEVABLE
action; the number of persons employed at the site; the effect on expenses and resources; legitimate safety requirements that are necessary for safe operation, including crime prevention measures...
-
Guestroom Doors
doorways (except shallow closets) into and within all guestrooms and suites (including guestroom bathrooms, kitchens, and connecting room doors) shall provide 32 inches of clear opening width measured...
-
11B-505.10.3 Bottom extension at stairs
The horizontal extension of a handrail shall be 12 inches (305 mm) long minimum and a height equal to that of the sloping portion of the handrail as measured above the stair nosings....
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
11B-604.8.1.2 Doors
404 except that if the approach is from the push side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 48 inches (1219 mm) minimum measured...
-
11B-703.5.5 Character height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
B. Survey and Review of Polling Place Locations
each newly proposed polling place location to determine whether it is accessible to persons with disabilities or could be made accessible on Election Day through the use of the remedial measures...
-
4.3.5.4 360-degree Turn
To better represent these situations, we based our measurements on a square-shaped space rather than circular as the former allows WhMD users to use the corners thereby optimizing space...
-
AJW Architectural Products U156 32 oz. Vertical Soap Dispenser - Surface Mounted
Dispensers pre-measured amounts of soap to prevent waste. Valve will dispense most liquids and lotions....
-
Stanley Hardware RP9401 Door Closer
standard aluminum storefront installation Conforms to ANSI/BHMA Standard A156.4 - 2000 Grade 1 UL listed Spring power is adjustable from size 2 through 5 (3 lbf - 11lbf closing force measured...
-
Section 6.0 Conclusions
The resources available in this study were devoted to measuring a large sample of individuals....
-
BACKGROUND
At a roundabout entrance where measured speeds were about 10 mi/h, almost all drivers yielded to a pedestrian who had one foot into the street and carried a long cane....
