In a limited study of wheelchair rolling resistance, the force needed to traverse four different surfaces was measured: concrete, linoleum, low-pile carpet (loop, 0.1-inch pile height, 10...
Search Results "Mitigating Measures"
-
What other surface considerations affect wheelchair travel?
-
Clear space
If a person required space beyond the size of the grid, the additional distance was measured and recorded. ...
-
(1) Site impracticality
The first test is an individual building test which involves a two-step process: measurement of the slope of the undisturbed site between the planned entrance and all vehicular or pedestrian...
-
Acceptable SEWF Systems
The ADA criteria for accessible surfaces have not been defined adequately within the ADA accessibility guidelines for quantitative measurement on any specific surface....
-
6. Dissemination Activities
Development and Characterization of Pathway Measurement Tool Wheelchairs poster presented at the Transportation Research Board annual meeting 2014 Duvall, J., Sinagra, E., Pearlman, J...
-
Selection of Methodology
A repeated survey measurements method was chosen by which survey respondents would initially complete survey questions within eight research sections: SECTION #1 Geographic, demographic...
-
II. Overview of Requirements
Must provide programs and services in an integrated setting, unless separate or different measures are necessary to ensure equal opportunity....
-
II-5.5000 Historic preservation programs
Are there any special limitations on measures required to achieve program accessibility in historic preservation programs in addition to the general fundamental alteration / undue financial...
-
2.2.3 Functional Reach
Determining an individual’s 3-D reach envelope required that the reach envelope be measured relative to certain environmental, wheelchair and personal features (e.g. 3-D envelopes measured...
-
Acoustical Society of America (ASA)
A variety of fields related to sound are represented: Physics Measurement Technologies and Instrumentation Nearly All Engineering Disciplines, including...
-
Section 36.403 Alterations: Path of Travel
36.304, the Department believes that this safe harbor strikes an appropriate balance between ensuring that individuals with disabilities are provided access to buildings and facilities and mitigating...
-
General: ADA Standard Section 706.1
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
-
1132A.5.1 General
Maneuvering clearances at interior doors shall provide a minimum length on both sides of the door of at least 42 inches (1067 mm) measured at a right angle to the plane of the door in its...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-411.2.1.2.5 Audio output
Auditory volume shall be at least 10 dB above ambient sound level, but shall not exceed 80 dB, measured 36 inches (914 mm) in front of the console....
-
5.4 Dining Areas
In non-elevator buildings, an accessible means of vertical access to the mezzanine is not required under the following conditions: 1) the area of mezzanine seating measures no more than...
-
1.2.5 Ramps
When overall running slope and cross slope for accessible ramps are measured according to Sections 1.1.11 a recommended tolerance for these slopes is +0.5%....
-
Clear Width [§405.5]
Clear Width [§405.5] Ramp runs must have a clear width of 36” minimum (measured between handrails where provided)....
-
11B-411.2.1.2.3 Accessibility function button
The dots shall be spaced ¼ inch (6.4 mm), measured center to center, in the form of an equilateral triangle with a vertex pointing up....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
AJW Architectural Products U115 32 oz. Stainless Steel Powder Soap Dispenser - Surface Mounted
Pre-measured amounts of powder soap are dispensed to prevent waste and is moisture resistant to avoid caking of powder....
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handle Faucet
Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter tops in the classroom....
-
AJW Architectural Products U116 16 oz. ABS Liquid Soap Dispenser - Surface Mounted
Valve is located above fluid level to assure a drip free operation and dispenses a pre-measured amount of soap to prevent waste. Housing: Fabricated of chrome plated brass....
