The ADA Guidelines define a "clearance box" that must fit under the table to be accessible....
Search Results "Clearance in Base"
Filters
Commonly Searched Documents
-
Pilot Rock: Picnic Table ADA Compliance Comparison
-
Polling place violations that can be remediated with temporary measures
Building Entrance: The pull side of the entrance door does not provide at least 18 inches clearance to the side of the latch (1991 ADA Stds 4.13.6, Fig. 25; 2010 ADA Stds 404.2.4)...
-
11B-809.2.2 Turning space
It is generally acceptable to use required clearances to provide wheelchair turning space....
-
NYC Board of Elections: Video 3 - Accessibility Clerk Responsibilities
-
Figure 604.3.2 (Exception) Overlap of Water Closet Clearance in Residential Dwelling Units – Drawing from the U.S. Access Board
-
Dome Size: ADA Standard Section 705.1.1
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (23 mm) minimum and 1.4 inches (36 mm) maximum, a top diameter of 50 percent of the base diameter minimum...
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
Clear Floor or Ground Space: ADA Standard Section 902.2
Knee and toe clearance complying with 306 shall be provided....
-
TTYs: ADA Standard Section 217.4
Section 217.4 covers scoping requirements in the current ADA Standards for TTYs.
-
803 Dressing, Fitting, and Locker Rooms
In the proposed rule, an exception to this provision noted that a portion of this space (6 inches maximum) could extend under partitions or openings without doors that provide toe clearance...
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
Grab Bars: ADA Standard Section 1009.4.5
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
Portable Floor Lifts
Portable Floor Lifts The most common types of lifts in medical settings are portable with a U-shaped base that moves along the floor on wheels....
-
AISLE
., that provides clearances in compliance with this code....
-
Attachment I
Both drinking fountains have spouts that are 33 3/4 inches above the finished floor and have knee clearances of 24 inches. ...
-
Transfer Entry: ADA Standard Section 1002.5.3
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1009.4.5 Grab bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
H. Eligibility for Admission to Vocational Education Centers, Branches or Annexes Based Upon Student Option
A vocational education center, branch or annex, open to all students in a service area and predominantly enrolling minority students or students of one race, national origin or sex,...
-
SCIFIT Recumbent Bikes - ISO1000R & ISO7000R
Featuring a true step-through design with 23 inches of clearance, SCIFIT recumbent bikes provide easy access for all users....
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
11B-902.2 Clear floor or ground space
Knee and toe clearance complying with Section 11B-306 shall be provided....
-
GSA Section 508 Tutorials, Guidance, Checklists
GSA staff are required to comply with the provisions of Section 508 and ensure accessibility of online electronic content, including but not limited to websites, web applications,...
-
Rockwood Manufacturing Company 11047 Series 47 Straight Single Bar Set 8" Pull CTC
• Base plates available — use BP prefix (BP11047) when ordering. • Heavy duty versions of most fastening types available — use suffix HD to fastening type number (11047 T3HD)....
