The top of the fixture rim shall be a maximum of 34 inches (864 mm) above the finished floor. 2. Floor space....
Search Results "Finished Grade"
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
-
11B-403.3 Slope
Exception: The running slope of sidewalks shall not exceed the general grade established for the adjacent street or highway. Advisory 11B-403.3 Slope....
-
11B-403.3 Slope
Exception: The running slope of sidewalks shall not exceed the general grade established for the adjacent street or highway. Advisory 11B-403.3 Slope....
-
608.2.1 Transfer Type Shower Compartments
Note: Inside finished dimensions measured at the center points of opposing sides Figure 608.2.1 Transfer Type Shower Compartment Size and Clearance...
-
610.2 Bathtub Seats
The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor....
-
D. Signage
signage will be relocated to between 48 inches measured to the baseline of the lowest tactile character and 60 inches measured to the baseline of the highest tactile character above the finish...
-
11B-603.5 Accessories
All operable parts, including coin slots, shall be 40 inches (1016 mm) maximum above the finish floor....
-
11B-603.5 Accessories
All operable parts, including coin slots, shall be 40 inches (1016 mm) maximum above the finish floor....
-
407.2.2.2 Visible Signals
Visible signal fixtures shall be centered at 72 inches (1830 mm) minimum above the finish floor or ground....
-
Stonelam Helps Buildings Get a Clean and Attractive Exterior Design
Using advanced Porcelain Slab technology, these surfaces give a neat finish, resist weather impact, and keep the structure looking fresh for years....
-
DC vs GT Match Today: Gujarat Titans Defeat Delhi Capitals by One Run in IPL 2026 Thriller
DC Vs GT Match Today will be remembered as one of the closest finishes of the season, showcasing high-intensity cricket and exceptional performances from both sides....
-
Allegion Falcon XX Series Cross Bar Exit Devices
For high use areas that demand high-performing products, the Falcon XX Series fills the bill with a sleek, tough and attractive exit device that delivers ANSI Grade 1 performance....
-
TownSteel ED6700 Narrow Stile Concealed Vertical Panic Device
It's UL listed Grade 1 panic device. ...
-
11B-405.9.2 Curb or barrier
inches (51 mm) high minimum, or barrier shall be provided that prevents the passage of a 4 inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish...
-
4.35.4 Bench
The bench shall be mounted 17 in to 19 in (430 mm to 485 mm) above the finish floor....
-
9.5 LOCKER ROOMS
., intended for use by people in wheelchairs shall be located no higher than 48 in (1220 mm) above the finished floor....
-
Signs [ADA Standards §216, §703]
Visual criteria address the height, style, proportion, and spacing of characters, as well as finish and contrast, line spacing, and other features (§703.5)....
-
11B-308.3.1 Unobstructed
approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side reach shall be 15 inches (381 mm) minimum above the finish...
-
606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground. EXCEPTIONS: 1....
-
Allegion LCN 2030 Series Overhead Concealed Door Control
The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements. ...
-
Allegion LCN 2010 Series Overhead Concealed Door Control
The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements. ...
-
1010.1.5 Floor elevation
Variations in elevation due to differences in finish materials, but not more than ½ inch (12.7 mm). 5....
-
Parking sign height measurement technique
502.6 says "Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign." But which floor or ground surface? ...
