are at rest in the load and unload position, the vertical difference between the floors shall be within plus or minus 5/8 inches (16 mm) and the horizontal gap shall be 3 inches (75 mm) maximum...
Search Results "Expected Maximum Flight Duration"
Filters
Commonly Searched Documents
-
Gaps: ADA Standard Section 1002.4.3
-
11B-104.1 Dimensions
Dimensions that are not stated as "maximum" or "minimum" are absolute. Advisory 11B-104.1 Dimensions. This section clarifies the dimensioning conventions used in this chapter. ...
-
11B-104.1 Dimensions
Dimensions that are not stated as “maximum” or “minimum” are absolute. Advisory 11B-104.1 Dimensions. This section clarifies the dimensioning conventions used in this chapter. ...
-
11B-104.1 Dimensions
Dimensions that are not stated as “maximum” or “minimum” are absolute. Advisory 11B-104.1 Dimensions. This section clarifies the dimensioning conventions used in this chapter....
-
Alterations: ADA Standard Section 202.3
Section 202.3 covers the most current requirements for alterations in existing building and facilities.
-
11B-202.5 Alterations to qualified historic buildings and facilities
(3)(i) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in §35.151...
-
F104.1 Dimensions
Dimensions that are not stated as "maximum" or "minimum" are absolute....
-
104.1 Dimensions
Dimensions that are not stated as "maximum" or "minimum" are absolute....
-
104.1 Dimensions
Dimensions that are not stated as "maximum" or "minimum" are absolute....
-
308 Reach Ranges
In the final rule, the maximum side reach has been lowered to the height specified for forward reaches....
-
Routes and Destinations: ADA Standard Section 810.6.2
Signs covered by this requirement shall, to the maximum extent practicable, be placed in uniform locations within the system....
-
11B-810.6.2 Routes and destinations
Signs covered by this requirement shall, to the maximum extent practicable, be placed in uniform locations within the system....
-
R302.5.4 Physical Constraints
R302.5.4 Physical Constraints. Where compliance with R302.5.1 or R302.5.2 is not practicable due to existing terrain or infrastructure, right-of-way availability, a notable natural...
-
Special Technical Provisions for Alterations to Existing Buildings and Facilities [4.1.6(3)]
Section 4.1.6(3) recognizes certain allowances where technical feasibility is encountered, such as steeper slopes for short ramps. Special provisions also address stairs, elevators,...
-
Side Approach and Reach
[See subsections ...]
-
Side Reach [§308.3]
The maximum reach depth for this range is 10” measured from the available clear floor space....
-
§ 35.151(b)(3)
(3) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in § 35.151(c...
-
M201.2 General Exception
Diagnostic equipment subject to M201.2 shall comply to the maximum extent practicable....
-
4.1.6(1)(j) EXCEPTION
(j) EXCEPTION: In alteration work, if compliance with 4.1.6 is technically infeasible, the alteration shall provide accessibility to the maximum extent feasible....
-
M201.2 General Exception (Section-by-Section Analysis)
Any equipment falling under this exception must comply with the provision(s) in question to the maximum extent practicable, and must fully comply with all other provisions not utilizing...
-
Section 35.151(b)(3) Alterations to historic facilities (Section-by-Section Analysis)
Currently, the regulation provides that alterations to historic facilities shall comply to the maximum extent feasible with section 4.1.7 of UFAS or section 4.1.7 of the 1991 Standards....
-
1. General Exception
Section 510 of the Rehabilitation Act requires the MDE Standards to provide independent access “to the maximum extent possible.”...
-
Minimum Required Depth: ADA Standard Section 306.2.3
Section 306.2.3 covers the current ADA Standards for the minimum required depth for toe clearance.
-
Alterations Affecting Primary Function Areas: ADA Standard Section 202.4
Section 202.4 covers the most current ADA Standards for alterations affecting primary function area.