Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
Search Results "Horizontal Position"
-
11B-608.3 Grab bars
-
11B-404.2.10 Door and gate surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other and be free of sharp or abrasive edges....
-
4. Wheelchair seat depth
Wheelchair seat depth For this study, wheelchair seat depth was calculated as the horizontal distance from the proximal (i.e., towards the rear) edge to the distal (i.e., towards the...
-
2.2 Lighting Conditions
On each trial one measurement of horizontal illuminance was manually recorded from a Minolta T-1 Illuminance meter....
-
11B-404.2.10 Door and gate surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other and be free of sharp or abrasive edges....
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
11B-404.2.10 Door and gate surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other and be free of sharp or abrasive edges....
-
404.2.10 Door and Gate Surfaces
Parts creating horizontal or vertical joints in these surfaces shall be within 1/16 inch (1.6 mm) of the same plane as the other....
-
11B-703.8.4 Character height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
11B-703.8.4 Character height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
11B-703.8.4 Character height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
Number of TTYs
Every call-taking position needs its own TTY equipment because experience has shown that: With TTY or TTY-compatible equipment at each call-taking position, call takers can handle TTY...
-
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
Features & Benefits: Heavy pedestrian / Heavy vehicular loading capabilities Appropriate for horizontal applications Comprised of Neoprene Rubber: Superior movement...
-
HEWI Hinged Support Rail Mono WARM TOUCH
- made of environmentally friendly, chrome-look coated polyamide - with a horizontal, round gripping level - loading capacity 220Lbs. (100 kg) (accessible to DIN 18040) - can be folded...
-
1. Q: Who is a "qualified individual with a disability" for employment?
A: A qualified individual with a disability is an employee or job applicant who meets legitimate skill, experience, education, or other requirements of an employment position that he or...
-
Start of Play Areas
Start of Play Areas The clear floor or ground space area at the start of play for each accessible hole must be 48 by 60 inches minimum to allow players to position themselves for the...
-
806.2.3 Sleeping Areas
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
EXHIBIT J WAIVER AND RELEASE OF CLAIMS
At QuikTrip Stores, fuel dispensers have two fueling positions, except at QuikTrip Travel Centers with diesel fuel dispensers that may have only one fueling position....
-
Section 1630.2(o) Reasonable Accommodation
An applicant for a position must be qualified for, and be able to perform the essential functions of, the position sought with or without reasonable accommodation....
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
-
36 Inch Wide Stalls
This stall is specifically designed for people who have difficulty walking or standing from a seated position....
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
