Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
Search Results "Horizontal Position"
-
R410.6 Character Height
-
A. Measuring Slope and Cross Slope
While holding the uphill end of the level on the pavement, place the pencil under the other end and roll it toward the uphill end of the level until the horizontal air bubble in the center...
-
Q. What kinds of actions are required to reasonably accommodate applicants and employees?
Reasonable accommodation also may include reassigning a current employee to a vacant position for which the individual is qualified, if the person becomes disabled and is unable to do the...
-
Other Sources
The Access Board used anthropometric data and other standards for the width of transfer surfaces on diagnostic equipment used by patients in a seated position (see M302.2.2), height of breast...
-
Imaging bed
A component of diagnostic scanning equipment that accommodates patients in supine, prone, or side-lying positions....
-
605.3 Clear Floor Space
A clear floor or ground space complying with 305 positioned for forward approach shall be provided....
-
1134A.6 Showers
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
Seats: ADA Standard Section 604.4
Section 604.4 covers the current ADA Standards for the water closet seats.
-
11B-604.5.1 Side wall
grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with the front end positioned...
-
11B-604.5.1 Side wall
grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with the front end positioned...
-
Base Support [No specific provision—affects M303.2.4]
force and breast thickness readout while positioning the patient....
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
4.31.7 Telephone Books
Telephone books, if provided, shall be located in a position that complies with the reach ranges specified in 4.2.5 and 4.2.6....
-
4.31.7 TELEPHONE BOOKS
Telephone books, if provided, shall be located in a position that complies with the reach ranges specified in 4.2.5 and 4.2.6....
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
Landscape Forms Inc. Scarborough Bench Collection
Horizontal strap or woven metal seat. Backed bench may be specified with a center arm. 96" backed bench may also be specified with 2 intermediate arms....
-
1630.4(d)
(d) Job assignments, job classifications, organizational structures, position descriptions, lines of progression, and seniority lists;...
-
409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by 409.4.1....
-
409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by 409.4.1....
