Primary entry doors, required exit doors or secondary exterior doors with changes in height between the interior surface or floor level and the exterior surface or floor level shall comply...
Search Results "Horizontal Exit"
Commonly Searched Documents
- 
    
  
  1132A.4 Level floor or landing
  
 - 
    
  
  Attachment I
  
There is no accessible emergency exit. Provide an accessible emergency exit. Standards §§ 4.1.6(1)(b), 4.1.3(9), 4.3.11....
 - 
    
  
  1002.4.4.2 Side Entry
  
wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to enter and exit...
 - 
    
  
  11B-1002.4.4.2 Side entry
  
wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to enter and exit...
 - 
    
  
  Power-Operated Doors or Gates
  
Those with doors or gates on opposing sides generally facilitate lift use by permitting a forward approach to both entry and exit doors or gates....
 - 
    
  
  Soft Contained Play Structures
  
Soft contained play environments typically have limited entrance and exit locations, with play components integrated into the system design....
 - 
    
  
  1002.4.4.2 Side Entry
  
wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to enter and exit...
 - 
    
  
  Path of Travel
  
§36.403(e)(1) A "path of travel" includes a continuous, unobstructed way of pedestrian passage by means of which the altered area may be approached, entered, and exited, and which connects...
 - 
    
  
  1002.4.4.2 Side Entry
  
wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to enter and exit...
 - 
    
  
  Doorways [4.8.4]
  
Keeping the door swing clear of minimum landing dimensions is a good idea, especially at the bottom of ramps since people using wheelchairs may exit them with some force and speed....
 - 
    
  
  Wheelchair Spaces
  
Wheelchair spaces should not overlap required exit widths or circulation paths and should provide for shoulder-to-shoulder alignment with occupants of adjacent seats (an important consideration...
 - 
    
  
  Floor Plan of Elevator Cars [4.10.9]
  
The primary test is whether a wheelchair user can enter the car, maneuver within reach of the controls, and exit....
 - 
    
  
  11B-1002.4.4.2 Side entry
  
wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to enter and exit...
 - 
    
  
  11B-1002.4.4.2 Side entry
  
wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to enter and exit...
 - 
    
  
  2. Shoulder Breadth
  
Shoulder breadth was computed as the horizontal distance between the lateral (outer) aspects of the deltoids....
 - 
    
  
  Detectable Warnings
  
proposed rule, consistent with the original ADAAG, provided specifications for the coordination of vehicles and platforms, including maximum changes in level (plus or minus e inch) and horizontal...
 - 
    
  
  1007.7.4 Separation
  
The fire-resistance-rated exterior wall construction shall extend horizontally 10 feet (3048 mm) beyond the landing on either side of the landing or equivalent fire-resistance-rated construction...
 - 
    
  
  608.3 Grab Bars
  
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
 - 
    
  
  1002.4.3 Gaps
  
coordinated so that, when amusement rides are at rest in the load and unload position, the vertical difference between the floors shall be within plus or minus 5/8 inches (16 mm) and the horizontal...
 - 
    
  
  307.2 Protrusion Limits
  
Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into...
 - 
    
  
  Bathroom Accommodating Reduced Ambulatory Mobility
  
Built-in seat in aromatherapy shower Soap dispenser (to prevent a fall from retrieving bar soap from the floor) Vertical and horizontal shower grab bars Hidden fold-down...
 - 
    
  
  Department of Justice method 
  
While holding the uphill end of the level on the pavement, place a pencil under the other end and roll it toward the uphill end of the level until the horizontal air bubble shows level....
 - 
    
  
  810.5.3 Platform and Vehicle Floor Coordination--Modification to 810.5.3 of Appendix D to 36 CFR Part 1191
  
In light rail, commuter rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192...
 - 
    
  
  11B-307.2 Protrusion limits
  
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...